The bursting tensile forces in end bocks with proportion Pi is given – McqOptions

MCQOPTIONS

1.	The bursting tensile forces in end bocks with proportion Pi is given as ____________
A.	Fbst = Pi(0.32-0.3(ypo/yo))
B.	Fbst = fi(0.32-0.3(ypo/yo))
C.	Fbst = Ti(0.32-0.3(ypo/yo))
D.	Fbst = πi(0.32-0.3(ypo/yo))
Answer» B. Fbst = fi(0.32-0.3(ypo/yo))

Discussion

No Comment Found

Related MCQs

If the anchor force points are towards the centroid, the center line of the member will not be greater than ____________
If the centre to centre spacing of the anchorage devices will not exceed 1.5 times width then they are considered as ____________
The main plate of the member in the anchorage zone has minimum edge distance of at least ____________
The member within or ahead of the anchorage zone will not have any ____________
The longitudinal extent of the concrete member which is rectangular in cross section is ____________
The bursting tensile forces in end bocks with proportion Pi is given as ____________
The tensile stresses which tend to split the concrete are placed in the transverse direction to the ____________
The stress distribution in concrete member which is away from the anchorage and in the region of the anchorage will be ____________
During stress distribution in end blocks the prestressing force is applied as ______________
IF_THE_CENTRE_TO_CENTRE_SPACING_OF_THE_ANCHORAGE_DEVICES_WILL_NOT_EXCEED_1.5_TIMES_WIDTH_THEN_THEY_ARE_CONSIDERED_AS:?$