MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 10 Mcqs, each offering curated multiple-choice questions to sharpen your Fluid Mechanics knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
If the tank is moving vertically, which of its component is subjected to maximum total pressure? |
| A. | Lower part of vertical walls |
| B. | Higher part of vertical walls |
| C. | Base |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 2. |
There will be development of shear stress due to the dynamic motion of tank or container. |
| A. | True |
| B. | False |
| Answer» C. | |
| 3. |
The pressure intensity at the bottom remains same, even if the tank moves with constant horizontal acceleration. |
| A. | True |
| B. | False |
| Answer» C. | |
| 4. |
A tank containing water upto a depth of 650 mm is stationary. Find the force exerted by fluid of specific gravity .55 on the side of tank,width of tank is 1.5m |
| A. | 1709.9 N |
| B. | 3419.4N |
| C. | 6838.8 N |
| D. | 1367.75 N |
| Answer» B. 3419.4N | |
| 5. |
A tank containing water upto a depth of 750 mm is moving vertically downward with a constant acceleration of 3.45 m/s2. Find the force exerted by fluid of specific gravity .85 on the side of tank,width of tank is 2m |
| A. | 2682.75 N |
| B. | 5365.5 N |
| C. | 1341.25 N |
| D. | 4024.5 N |
| Answer» B. 5365.5 N | |
| 6. |
A tank containing water upto a depth of 500 mm is moving vertically upward with a constant acceleration of 2.45 m/s2. Find the force exerted by fluid of specific gravity .65 on the side of tank,width of tank is 1m. |
| A. | 996.1 N |
| B. | 1992.2 N |
| C. | 498.06 N |
| D. | 124.5 N |
| Answer» B. 1992.2 N | |
| 7. |
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank. |
| A. | 1.07 MN |
| B. | 2.14 MN |
| C. | 4.28 MN |
| D. | 4.35 MN |
| Answer» B. 2.14 MN | |
| 8. |
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 5.5 m/s2. The length of tank is 5.5 m and depth is 2 m. If tank is open at the top then calculate the minimum pressure intensity at the bottom. |
| A. | 3.8 N/cm<sup>2</sup> |
| B. | 1.9 N/cm<sup>2</sup> |
| C. | 5.7 N/cm<sup>2</sup> |
| D. | 2.6 N/cm<sup>2</sup> |
| Answer» C. 5.7 N/cm<sup>2</sup> | |
| 9. |
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.8 m/s2. The length of tank is 7 m and depth is 1.5 m. If tank is open at the top then calculate the maximum pressure intensity at the bottom. |
| A. | 6.3 N/cm<sup>2</sup> |
| B. | 3.15 N/cm<sup>2</sup> |
| C. | 12.6 N/cm<sup>2</sup> |
| D. | 1.6 N/cm<sup>2</sup> |
| Answer» C. 12.6 N/cm<sup>2</sup> | |
| 10. |
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 3.6 m/s2. If tank is open at the top then calculate the angle of water surface to the horizontal. |
| A. | 20.15 |
| B. | 69.84 |
| C. | 40.30 |
| D. | None of the mentioned |
| Answer» B. 69.84 | |