A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank.

A rectangular tank is moving horizontally in the direction of its leng

1.	A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank.
A.	1.07 MN
B.	2.14 MN
C.	4.28 MN
D.	4.35 MN
Answer» B. 2.14 MN

Discussion

No Comment Found

Related MCQs

If the tank is moving vertically, which of its component is subjected to maximum total pressure?
There will be development of shear stress due to the dynamic motion of tank or container.
The pressure intensity at the bottom remains same, even if the tank moves with constant horizontal acceleration.
A tank containing water upto a depth of 650 mm is stationary. Find the force exerted by fluid of specific gravity .55 on the side of tank,width of tank is 1.5m
A tank containing water upto a depth of 750 mm is moving vertically downward with a constant acceleration of 3.45 m/s2. Find the force exerted by fluid of specific gravity .85 on the side of tank,width of tank is 2m
A tank containing water upto a depth of 500 mm is moving vertically upward with a constant acceleration of 2.45 m/s2. Find the force exerted by fluid of specific gravity .65 on the side of tank,width of tank is 1m.
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank.
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 5.5 m/s2. The length of tank is 5.5 m and depth is 2 m. If tank is open at the top then calculate the minimum pressure intensity at the bottom.
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.8 m/s2. The length of tank is 7 m and depth is 1.5 m. If tank is open at the top then calculate the maximum pressure intensity at the bottom.
A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 3.6 m/s2. If tank is open at the top then calculate the angle of water surface to the horizontal.

A rectangular tank is moving horizontally in the direction of its length with a constant acceleration of 4.5 m/s2.The length, width and depth of tank are 7 m, 3m, 2.5m respectively. If tank is open at the top then calculate the total force due to water acting on higher pressure end of the tank.

Discussion

No Comment Found

Related MCQs

Reply to Comment