94 + Mcqs in Entrepreneurship Development (ED) Page 1 McqOptions

1.	..entrepreneurs neither introduce new changes nor adopt new methods innovated by others.
A.	technical
B.	fabian
C.	induced
D.	business
Answer» C. induced

Discussion

2.	Social attitude is one of the important problems of a .. Entrepreneur.
A.	drone.
B.	business.
C.	women.
D.	adoptive.
Answer» D. adoptive.

Discussion

3.	A small enterprise is one in which the investment in plant and machinery is more than Rs . But does not exceed Rs .. .
A.	10 lakhs / 2 crores
B.	25 lakhs /5crores
C.	5 crores/ 10 crores
D.	2 crores/5 crores
Answer» C. 5 crores/ 10 crores

Discussion

4.	A micro enterprise is one in which the investment in plant and machinery does not exceed Rs.
A.	25 lakhs
B.	50 lakhs
C.	1 crore
D.	10 lakhs
Answer» B. 50 lakhs

Discussion

5.	A medium enterprise is one in which the investment in plant and machinery is more than Rs . But does not exceed Rs .. .
A.	10 lakhs / 2 crores
B.	25 lakhs /5crores
C.	5 crores/ 10 crores
D.	2 crores/5 crores
Answer» D. 2 crores/5 crores

Discussion

6.	A small enterprise is one in which the investment in plants and machinery is more than Rs . But does not exceed Rs .
A.	10 lakhs / 2 crores
B.	25 lakhs /5crores
C.	5 crores/ 10 crores
D.	2 crores/5 crores
Answer» B. 25 lakhs /5crores

Discussion

7.	A medium enterprise is one in which the investment in plant and machinery is more than Rs but does not exceed Rs . ..
A.	10 lakhs / 2 crores
B.	25 lakhs /5crores
C.	crores/ 10 crores
D.	2 crores/5 crores
Answer» E.

Discussion

8.	.. Registration helps the entrepreneur to take necessary steps to bring industrial units into existence.
A.	provisional
B.	permanent
C.	both of these
D.	none of these
Answer» B. permanent

Discussion

9.	.is the place where the required facilities and factory accommodation are provided by the government to the entrepreneurs to establish their industries there.
A.	industry
B.	industrial estate
C.	company
D.	none of these
Answer» C. company

Discussion

10.	. Is the financial and promotional assistance provided by the Govt. to the industries for boosting up industrial development in all regions particularly in backward areas.
A.	seed capital
B.	incentive
C.	subsidy
D.	none of these
Answer» C. subsidy

Discussion

11.	Department of industries and commerce formulated a scheme to set up . To inculcate entrepreneurial culture amongst youth.
A.	ed clubs
B.	youth clubs
C.	lion clubs
D.	none
Answer» B. youth clubs

Discussion

12.	A grant of Will be given to each ED club by the department of Commerce and industry.
A.	20000
B.	15000
C.	18000
D.	12000
Answer» E.

Discussion

13.	A . Is an organization designed and success of entrepreneurial companies through an array of business support resources and services.
A.	business incubators.
B.	industrial estates.
C.	dic.
D.	none of these.
Answer» B. industrial estates.

Discussion

14.	.analysis is concerned with identification of project demand potential and selection of optimal technology:
A.	techno-economic
B.	network
C.	financial
D.	social cost-benefit
Answer» B. network

Discussion

15.	The capacity to take repeated and different actions to overcome obstacles is called ..
A.	persistence
B.	initiative
C.	competency
D.	creativity.
Answer» B. initiative

Discussion

16.	analysis aims at analyzing the real contribution of an investment project towards welfare of country as a whole;
A.	techno-economic
B.	network
C.	financial
D.	social cost-benefit
Answer» E.

Discussion

17.	. Analysis involves estimation of project costs and revenues and funds required for the project:
A.	techno-economic
B.	network
C.	financial
D.	social cost-benefit
Answer» D. social cost-benefit

Discussion

18.	. Analysis is concerned with the development of detailed work plan of the project and its time profile:
A.	techno-economic
B.	network
C.	financial
D.	social cost-benefit
Answer» C. financial

Discussion

19.	.. Refers to manner in which a company s inputs are transferred into output process:
A.	process
B.	method
C.	technology
D.	method
Answer» D. method

Discussion

20.	. Give right to use patented technology and get related know-how on mutually agreed basis:
A.	technology licensing.
B.	purchase of technology.
C.	joint venture.
D.	indigenous technology.
Answer» B. purchase of technology.

Discussion

21.	The supplier may participate technically as well as financially in a arrangement.
A.	technology licensing.
B.	purchase of technology.
C.	joint venture.
D.	indigenous technology
Answer» D. indigenous technology

Discussion

22.	In Men and equipment are moved to the material which remains in one place:
A.	process layout.
B.	combined layout.
C.	stationary layout.
D.	cellular layout.
Answer» D. cellular layout.

Discussion

23.	.. Refers to the arrangement of machines, equipments and other physical facilities within factory premises:
A.	plant capacity.
B.	plant location.
C.	plant layout.
D.	process layout.
Answer» D. process layout.

Discussion

24.	In machines dedicated to sequences of production are grouped into cells:
A.	process layout.
B.	combined layout.
C.	stationary layout.
D.	cellular layout.
Answer» E.

Discussion

25.	In .. Similar machines are placed in one place according to operations they perform:
A.	process layout.
B.	combined layout.
C.	stationary layout.
D.	cellular layout.
Answer» B. combined layout.

Discussion

26.	There is a continuous flow of materials in process towards the finished product stage in
A.	process layout.
B.	combined layout.
C.	stationary layout.
D.	product layout
Answer» E.

Discussion

27.	..provides clues to pertinent questions like what, why, how, when and where of the project.
A.	feasibility report
B.	interim report
C.	project report
D.	progress report
Answer» D. progress report

Discussion

28.	skill relates to accounting and financing control, marketing, production planning and inventory control and to manage people who work in the enterprise.
A.	communication
B.	decision-making
C.	project development
D.	management
Answer» E.

Discussion

29.	..is a combination of knowledge, skills and appropriate motives that an individual must possess to perform a given task.
A.	persistence
B.	initiative
C.	competency
D.	creativity.
Answer» D. creativity.

Discussion

30.	_____________ is used to accomplish the project economically in the minimum available time with limited resources
A.	Project Scheduling.
B.	Network Analysis.
C.	Budget Analysis.
D.	Critical Planning
Answer» B. Network Analysis.

Discussion

31.	report is a document wherein all the details obtained from technical analysis, financial analysis, profitability analysis etc. are put together.
A.	feasibility
B.	project
C.	both
D.	none
Answer» D. none

Discussion

32.	. Is an essential document for procuring assistance from financial institutions and for fulfilling other formalities for the implementation of the project.
A.	feasibility
B.	project
C.	progress
D.	none
Answer» C. progress

Discussion

33.	The initial capital that is required to obtain loans from the financial institutions is called
A.	seed capital
B.	incentive
C.	subsidy
D.	none of these
Answer» B. incentive

Discussion

34.	A single lump sum which is given by a govt. to an entrepreneur to cover the cost is known as .
A.	subsidy.
B.	concession.
C.	bounties.
D.	none of these.
Answer» B. concession.

Discussion

35.	means organising, housing and servicing industry, a planned clustering of industrial enterprises offering standard factory buildings erected in advance of demand and a variety of services and facilities to the occupants.
A.	industry
B.	industrial estate
C.	company
D.	none of these
Answer» C. company

Discussion

36.	is a network technique of scheduling and controlling the project where activity times cannot be precisely estimated.
A.	pert
B.	cpm
C.	bep
D.	swot
Answer» B. cpm

Discussion

37.	The process of evaluating the project ideas with a view to select the best and promising idea after eliminating the unprofitable ideas is called .. Of the project ideas.
A.	screening
B.	appraisal
C.	identification
D.	none
Answer» B. appraisal

Discussion

38.	The process of evaluating the project ideas with a view to select the best and promising idea after eliminating the unprofitable ideas is called .. Of the project ideas.
A.	Screening
B.	appraisal
C.	identification
D.	none
Answer» B. appraisal

Discussion

39.	Investment Limit of a Micro Enterprise under manufacturing sector does not exceed _____lakhs.
A.	10
B.	20
C.	25
D.	50
Answer» D. 50

Discussion

40.	The difference between the total present value of a stream of cash flows of a given rate of discount and the initial capital outlay is known as the :
A.	irr.
B.	arr.
C.	npv.
D.	net profit.
Answer» D. net profit.

Discussion

41.	2 120) The excess of the present value over the cost of the project is ..
A.	IRR
B.	ARR
C.	NPV
D.	NTV
Answer» B. ARR

Discussion

42.	.shows movement of cash into and out of the firm and its net effect on balance sheet.
A.	cash flow
B.	fund flow
C.	ratio
D.	breakeven
Answer» B. fund flow

Discussion

43.	Mathematical relationship between two figures taken from financial statements is called .
A.	cash flow
B.	fund flow
C.	ratio
D.	breakeven
Answer» D. breakeven

Discussion

44.	..ratio establishes relationship between contribution margin and total sales.
A.	p/v
B.	current
C.	profitability
D.	none
Answer» B. current

Discussion

45.	shows the changes in assets, liabilities and net worth between two balance sheet dates.
A.	cash flow
B.	fund flow
C.	ratio
D.	breakeven
Answer» C. ratio

Discussion

46.	technology refers to that technology which is suitable to local, economic, social and cultural conditions.
A.	indigenous
B.	imported
C.	advanced
D.	appropriate
Answer» E.

Discussion

47.	Under the single roof of the all the services and support required by small and village entrepreneurs are provided.
A.	ksidc
B.	kitco
C.	dic
D.	kinfra
Answer» D. kinfra

Discussion

48.	is an area where applied research on high tech projects is conducted
A.	step
B.	swot
C.	epst
D.	none of these
Answer» B. swot

Discussion

49.	. Analysis is primarily concerned with the identification, quantification and evaluation of project resources.
A.	network
B.	financial
C.	techno-economic
D.	input
Answer» E.

Discussion

50.	A micro enterprise is one in which the investment in plant and machinery does not exceed Rs .. .
A.	25 lakhs
B.	50 lakhs
C.	1 crore
D.	10 lakhs
Answer» E.

Discussion

Explore topic-wise MCQs in Bachelor of Business Administration (BBA).

..entrepreneurs neither introduce new changes nor adopt new methods innovated by others.

Social attitude is one of the important problems of a .. Entrepreneur.

A small enterprise is one in which the investment in plant and machinery is more than Rs . But does not exceed Rs .. .

A micro enterprise is one in which the investment in plant and machinery does not exceed Rs.

A medium enterprise is one in which the investment in plant and machinery is more than Rs . But does not exceed Rs .. .

A small enterprise is one in which the investment in plants and machinery is more than Rs . But does not exceed Rs .

A medium enterprise is one in which the investment in plant and machinery is more than Rs but does not exceed Rs . ..

.. Registration helps the entrepreneur to take necessary steps to bring industrial units into existence.

.is the place where the required facilities and factory accommodation are provided by the government to the entrepreneurs to establish their industries there.

. Is the financial and promotional assistance provided by the Govt. to the industries for boosting up industrial development in all regions particularly in backward areas.

Department of industries and commerce formulated a scheme to set up . To inculcate entrepreneurial culture amongst youth.

A grant of Will be given to each ED club by the department of Commerce and industry.

A . Is an organization designed and success of entrepreneurial companies through an array of business support resources and services.

.analysis is concerned with identification of project demand potential and selection of optimal technology:

The capacity to take repeated and different actions to overcome obstacles is called ..

analysis aims at analyzing the real contribution of an investment project towards welfare of country as a whole;

. Analysis involves estimation of project costs and revenues and funds required for the project:

. Analysis is concerned with the development of detailed work plan of the project and its time profile:

.. Refers to manner in which a company s inputs are transferred into output process:

. Give right to use patented technology and get related know-how on mutually agreed basis:

The supplier may participate technically as well as financially in a arrangement.

In Men and equipment are moved to the material which remains in one place:

.. Refers to the arrangement of machines, equipments and other physical facilities within factory premises:

In machines dedicated to sequences of production are grouped into cells:

In .. Similar machines are placed in one place according to operations they perform:

There is a continuous flow of materials in process towards the finished product stage in

..provides clues to pertinent questions like what, why, how, when and where of the project.

skill relates to accounting and financing control, marketing, production planning and inventory control and to manage people who work in the enterprise.

..is a combination of knowledge, skills and appropriate motives that an individual must possess to perform a given task.

_____________ is used to accomplish the project economically in the minimum available time with limited resources

report is a document wherein all the details obtained from technical analysis, financial analysis, profitability analysis etc. are put together.

. Is an essential document for procuring assistance from financial institutions and for fulfilling other formalities for the implementation of the project.

The initial capital that is required to obtain loans from the financial institutions is called

A single lump sum which is given by a govt. to an entrepreneur to cover the cost is known as .

means organising, housing and servicing industry, a planned clustering of industrial enterprises offering standard factory buildings erected in advance of demand and a variety of services and facilities to the occupants.

is a network technique of scheduling and controlling the project where activity times cannot be precisely estimated.

The process of evaluating the project ideas with a view to select the best and promising idea after eliminating the unprofitable ideas is called .. Of the project ideas.

The process of evaluating the project ideas with a view to select the best and promising idea after eliminating the unprofitable ideas is called .. Of the project ideas.

Investment Limit of a Micro Enterprise under manufacturing sector does not exceed _____lakhs.

The difference between the total present value of a stream of cash flows of a given rate of discount and the initial capital outlay is known as the :

2 120) The excess of the present value over the cost of the project is ..

.shows movement of cash into and out of the firm and its net effect on balance sheet.

Mathematical relationship between two figures taken from financial statements is called .

..ratio establishes relationship between contribution margin and total sales.

shows the changes in assets, liabilities and net worth between two balance sheet dates.

technology refers to that technology which is suitable to local, economic, social and cultural conditions.

Under the single roof of the all the services and support required by small and village entrepreneurs are provided.

is an area where applied research on high tech projects is conducted

. Analysis is primarily concerned with the identification, quantification and evaluation of project resources.

A micro enterprise is one in which the investment in plant and machinery does not exceed Rs .. .