Explore topic-wise MCQs in Embedded Systems.

This section includes 2374 Mcqs, each offering curated multiple-choice questions to sharpen your Embedded Systems knowledge and support exam preparation. Choose a topic below to get started.

1501.

______ is the difference of Level between full reservoir level and top of the dam.

A. Net free board
B. Gross free board
C. Design free board
D. Over free board
Answer» C. Design free board
1502.

To prepare EDTA solution, _________ grams of EDTA is dissolved in the one litre of water.

A. 1
B. 2
C. 3
D. 4
Answer» E.
1503.

The configuration in which multiple pressure ports are located in the aircraft forebody is called as _____

A. Flush air data system
B. Redundant air data system
C. Multiple port system
D. Nose cone port system
Answer» B. Redundant air data system
1504.

What is the Upper control limit for the standardized control chart for u-chart with variable sample size?

A. 0
B. 1
C. 1.5
D. 3
Answer» E.
1505.

Mark two main features of Genetic Algorithm

A. Fitness function & Crossover techniques
B. Crossover techniques & Random mutation
C. Individuals among the population & Random mutation
D. Random mutation & Fitness function
Answer» B. Crossover techniques & Random mutation
1506.

Which is the largest unit of the Great Plain of India?

A. Brahmaputra plain
B. Punjab-Haryana plain
C. Gangetic plain
D. Godavari plain
Answer» D. Godavari plain
1507.

How the voice is transferred to our phone?

A. Internet
B. Bluetooth
C. Sharing applications
D. Zigbee
Answer» B. Bluetooth
1508.

Curtis turbine is a

A. pressure compounded turbine
B. velocity compounded turbine
C. simple reaction turbine
D. pressure-velocity compounded turbine
Answer» E.
1509.

The current reflection coefficient of a line with voltage reflection coefficient of 0.65 is given by

A. 0
B. 0.65
C. -0.65
D. 0.35
Answer» D. 0.35
1510.

What is introduced between the dam and power house?

A. Penstock
B. Draft tube
C. Prime mover
D. Surge tank
Answer» E.
1511.

Luciferase is a ______________

A. Promoter
B. Inducer
C. Reporter
D. Suppressor
Answer» D. Suppressor
1512.

Plastic working in the temperature range of 0.3-0.5 Tm is called _________

A. Hot work
B. Cold work
C. Emboss
D. Sheet metal
Answer» C. Emboss
1513.

Which of the following filters are used in tandem spectrometer?

A. Quadrupole mass filter
B. Low energy filter
C. High energy filter
D. Time of flight mass filter
Answer» B. Low energy filter
1514.

Starting torque induced in a three phase induction motor in a direction of rotating magnetic field depends on

A. rotor mmf per pole
B. rotor power factor angle
C. type of rotor winding
D. (i), (ii)
Answer» B. rotor power factor angle
1515.

Which_of_the_following_is_not_a_part_of_transformer_installation?

A. Conservator
B. Breather
C. Buchholz relay
D. Exciter
Answer» E.
1516.

What_are_dominant_selectable_markers?

A. Drug-resistance genes
B. Inducing genes
C. Exogenous genes
D. Endogenous genes
Answer» B. Inducing genes
1517.

What_among_the_following_belongs_to_learnability?

A. Does the system respond with appropriate speed to a user request
B. Can the user remember how to do system operations between users of the system
C. How quick is it for the user to learn to use the system’s interface
D. Does the system anticipate and prevent common user error?
Answer» D. Does the system anticipate and prevent common user error?
1518.

The_top_view,_front_view_and_side_view_of_a_triangle_parallel_to_vertical_plane,_circle_parallel_to_profile_plane_and_rectangle_parallel_to_horizontal_plane_respectively_are____________

A. line, circle, line
B. triangle, line, rectangle
C. triangle, line, line
D. line, line, line
Answer» E.
1519.

The_largest_production_of_Italian_cheese_went_to_the_production_of_______________cheese.

A. Cheddar
B. Brie
C. Mozzarella
D. Provolone
Answer» D. Provolone
1520.

Which_part_of_the_ear_takes_sound_waves_and_turns_them_into_vibrations?

A. Middle war
B. Ear wall
C. Ear canal
D. Inner ear
Answer» B. Ear wall
1521.

To_convert_its_current_output_into_a_voltage,_the_DAC_0808_is_connected_with

A. Transistor(BJT) externally
B. FET externally
C. OPAMP externally
D. OPAMP internally
Answer» D. OPAMP internally
1522.

To_distribute_processing_over_many_nodes,_perhaps_to_increase_result_speed_through_the_use_of_concurrences,_perhaps_merely_to_provide_load_balance_and_fault_tolerance.

A. Grid
B. GridGain
C. All of the mentioned
D. None of the mentioned
Answer» C. All of the mentioned
1523.

The_first_system_of_forces_consist_of_____________

A. Difference between actual column loads
B. Varying distributed load acting downwards
C. Column support reaction acting downwards
D. All of the mentioned
Answer» D. All of the mentioned
1524.

Schick_Test_is_used_for_detection_of_which_of_the_following_disease?

A. Diphtheria
B. Tuberculosis
C. Erythrasma
D. Botulism
Answer» B. Tuberculosis
1525.

What is the term used for a batholith when surface area is less than 100 km?

A. Dykes
B. Stock
C. Sock
D. Sillets
Answer» C. Sock
1526.

What is the hydraulic loading rate considered for a high rate dissolved air flotation?

A. 10-30 m/h
B. 30-35 m/h
C. 40-55 m/h
D. 60-80 m/h
Answer» B. 30-35 m/h
1527.

Which of these is not mentioned in a skills profile?

A. Career aim
B. Academic achievements
C. Interests
D. Employment
Answer» C. Interests
1528.

A driving point impedance with pole at ω = 0 and zero at ω = ∞ must have ___________ term in the denominator polynomial?#

A. s
B. s+3
C. s+1
D. s+2
Answer» B. s+3
1529.

________ is a micromachining technique where suspended structures are formed on silicon substrates?

A. MMIC
B. HIC
C. RF MEMS
D. none of the mentioned
Answer» D. none of the mentioned
1530.

Semi-synthetic fluid is a type of lubricant which is generally insoluble in water?

A. True
B. False
Answer» C.
1531.

The de-ionised water is used for flush away the burr as well as to cool the workpiece?

A. True
B. False
Answer» B. False
1532.

The communication between a memory and its environment is achieved throug?

A. Control lines
B. Data input/output lines
C. Address selection lines
D. All of the Mentioned
Answer» E.
1533.

Which of the following is used to calculate distances on a Euclidean plane ?

A. 2dsph
B. 2d
C. geoHaystack
D. all of the mentioned
Answer» C. geoHaystack
1534.

What does an increase in temperature causes?

A. Increase in PN stress
B. Decrease in dislocation velocity
C. Increase in fracture energy
D. Decrease in slip planes.
Answer» D. Decrease in slip planes.
1535.

The system given by equation 5 d3⁄dt3 y(t) + 10 d⁄dt y(t) – 5y(t) = x(t) + ∫0t x(t)dt, i?#

A. Stable
B. Unstable
C. Has poles 0, 0.455, -0.236±1.567
D. Has zeros 0, 0.455, -0.226±1.467
Answer» B. Unstable
1536.

When the NPSH is low, it leads to _______?

A. Breaking
B. Wear
C. Corrosion
D. Cavitation
Answer» E.
1537.

State whether following statement is true or false regarding the applications of EDM?

A.
B. True
Answer» C.
1538.

Which causes degradation of transconductance?

A. low source resistance
B. high source resistance
C. low drain resistance
D. high drain resistance
Answer» C. low drain resistance
1539.

Spark is engineered from the bottom-up for performance, running ___________ faster than Hadoop by exploiting in memory computing and other optimizations?

A. 100x
B. 150x
C. 200x
D. None of the mentioned
Answer» B. 150x
1540.

Choose the object/objects defined by the Textwriter class?

A. Console.In
B. Console
C. Console.Error
D. None of the mentioned
Answer» D. None of the mentioned
1541.

What is the percentage of C3H7O4 in the product?

A. 10
B. 16
C. 31
D. 43
Answer» D. 43
1542.

Which of the following results in allocation of memory for the extern variables?

A. Declaration
B. Definition
C. Including file
D. Memory is not allocated for extern variables
Answer» C. Including file
1543.

Which of the following is a real time clock?

A. MC146818
B. 8253
C. 8259
D. 8254
Answer» B. 8253
1544.

The _________ are provided in expansion and contraction joints to transfer the load?

A. Dowels
B. Fillers
C. Joint filler
D. Waterbars
Answer» B. Fillers
1545.

Which of the following is not the method of auxiliary commutation?

A. Voltage commutation
B. Resistance commutation
C. Current commutation
D. Load commutation
Answer» C. Current commutation
1546.

____________ attack is a combination of Dictionary attack & brute force attack?

A. Syllable
B. Syllabi
C. Database
D. Phishing
Answer» B. Syllabi
1547.

Which of the following software tool is parser generator?

A. Lex
B. Yacc
C. Both of the mentioned
D. None of the mentioned
Answer» C. Both of the mentioned
1548.

How many types of EDM are there based on the reflector type?

A. 3
B. 5
C. 4
D. 2
Answer» B. 5
1549.

How is copper or cobalt removed from sulphide ore?

A. Leaching
B. Filtration
C. Sieving
D. Froth floatation
Answer» B. Filtration
1550.

Process of changing resting potential to action potential is known as ______________?

A. Polarization
B. Re polarization
C. Depolarization
D. Uni polarization
Answer» D. Uni polarization