Explore topic-wise MCQs in Embedded Systems.

This section includes 2374 Mcqs, each offering curated multiple-choice questions to sharpen your Embedded Systems knowledge and support exam preparation. Choose a topic below to get started.

1251.

IF_WE_HAVE_AN_OBJECT_R_AND_WANT_TO_KNOW_IF_IT_IS_A_RANGE_OBJECT,_WE_CAN_WRITE:?$

A. r typeof Range
B. r is Range
C. r equals Range
D. r instanceof Range
Answer» D. r instanceof Range
1252.

IF_A_PLANE_IS_PARALLEL_TO_ONE_OF_THE_REFERENCE_PLANE_THEN_THE_PROJECTION_ONTO_THE_OTHER_REFERENCE_PLANES_WOULD_BE_A_LINE.?$

A. True
B. False
Answer» B. False
1253.

THE_TERMINATION_OF_A_WALL_IN_SUCH_A_FASHION_THAT_EACH_ALTERNATE_COURSE_AT_THE_END_PROJECTS_IS_KNOWN_AS_THE__________?$

A. Racking back
B. Tooting
C. Frog
D. Lap
Answer» C. Frog
1254.

WHICH_OF_THESE_IS_FALSE_??$

A. Terminological consistency is simply using words with same meaning and always using the same words to refer to particular thing
B. A stakeholder goal or need is within the project scope
C. A statement is correct if it is contingent and accords with the facts
D. None of the mentioned
Answer» E.
1255.

STEAM_ENTERS_A_TURBINE_AT_550¬¨ àûC,_25_MPA_AND_EXITS_AT_5_MPA,_325¬¨ àûC_AT_A_FLOW_RATE_OF_70_KG/S._DETERMINE_THE_SECOND_LAW_EFFICIENCY.?$#

A. 0.68
B. 0.78
C. 0.88
D. 0.98
Answer» D. 0.98
1256.

CALIFORNIA_IS_THE_LEADING_STATE_IN_PRODUCTION_OF_ICE_CREAM,_WHICH_STATE_WAS_SECOND??$

A. Texas
B. Indiana
C. Minnesota
D. Colorado
Answer» C. Minnesota
1257.

THE________________IDENTIFIES_THE_DECISION_POINTS_AND_THE_ASSIGNMENTS_ASSOCIATED_WITH_EACH_FLOW.?$

A. Decision Table
B. Flowgraph
C. Testing Design
D. Audit
Answer» C. Testing Design
1258.

THE_NUMBER_OF_CHIASMA_IN_DIAKINESIS_STAGE__________?$

A. Increases
B. Decreases
C. Remains same
D. There are no chiasma left
Answer» C. Remains same
1259.

THE_SATURATION_CURRENT_OF_THE_MOSFET_IS_THE_VALUE_OF_THE_CURRENT_WHEN?$

A. The voltage between the drain and drain becomes equal to the overdrive voltage
B. The voltage between the drain and drain becomes equal to the threshold voltage
C. The voltage between the drain and drain becomes equal to the voltage applied to the gate
D. The voltage between the drain and drain becomes equal to difference the overdrive voltage and the threshold voltage
Answer» B. The voltage between the drain and drain becomes equal to the threshold voltage
1260.

WHICH_OF_THE_FOLLOWING_STATEMENT_GIVES_SAMPLING_INTERVAL_??$

A. $sampling.interval
B. $sampling.time
C. $sampling.date
D. None of the mentioned
Answer» C. $sampling.date
1261.

WHAT_IS_SCREW_DRYER_SUITABLE_FOR??$

A. Very thick slurries
B. Materials which are heat sensitive
C. Free flowing granular materials
D. Free flowing slurries
Answer» D. Free flowing slurries
1262.

WHICH_OF_THE_FOLLOWING_FUNCTION_CAN_BE_USED_TO_COMBINE_DIFFERENT_VECTORS_SO_AS_TO_OBTAIN_THE_RESULT_FOR_EACH_N-UPLET??$

A. iid_
B. ix_
C. ixd_
D. all of the Mentioned
Answer» C. ixd_
1263.

PL_PROPERTIES_OF_MPSI_AND_‚ÂÀ√≠¬¨‚À´PSI_STRUCTURES_DEPEND_ON______?$#

A. temperature
B. etching conditions
C. light intensity
D. refractive index
Answer» C. light intensity
1264.

WHICH_OF_THE_FOLLOWING_PRODUCES_MAXIMUM_ATP??$

A. Krebs cycle
B. Glycolysis
C. Fermentation
D. Oxidative Phosphorylation
Answer» E.
1265.

MAXIMUM_RADIUS_OF_GYRATION_(MINIMUM_SLENDERNESS_RATIO)_CAN_BE_OBTAINED_BY?$

A. by increasing load
B. by spreading material of section towards its axis
C. by spreading material of section away from its axis
D. by spreading material of section at its axis
Answer» D. by spreading material of section at its axis
1266.

SEQUENCE_OF_EAR_OSSCILES_FROM_OUTSIDE_TO_INSIDE_IS_____________?$

A. Malleus incus stapes
B. Incus stapes Malleus
C. Stapes incus malleus
D. Malleus stapes incus
Answer» B. Incus stapes Malleus
1267.

WHICH_IS_TRUE_IN_INTERFACING_7_SEGMENT_CODE_DISPLAY??$

A. transmitted by second port
B. display is selected by third port
C. display is selected by second port
D. none of the mentioned
Answer» D. none of the mentioned
1268.

A_STRUCTURE_THAT_IS_SYSTEM-_DEPENDENT.?$

A. Logical
B. Smart
C. Nano
D. Physical
Answer» E.
1269.

EACH_ROUND_USES_A_DIFFERENT_KEY_IN_THE_ALGORITHM.?$

A. True
B. False
Answer» B. False
1270.

MOORE_FILTER_IS_A_FILTER_____?$

A. Leaf
B. Press
C. Rotary
D. Sand
Answer» B. Press
1271.

GYRATORY_SCREENS_ARE_USED_WHEN_IT_IS_A_CONTINUOUS_OPERATION_TO_BE_HANDLED_AND_THE_AMOUNT_OF_MATERIAL_TO_BE_HANDLED_IS_VERY_HIGH.?$

A. True
B. False
Answer» B. False
1272.

ON_UNIX-LIKE_OPERATING_SYSTEMS,_YOU_START_TERRACOTTA_AS_:-?$

A. $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA CONFIGURATION
B. $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA
C. $TERRACOTTA HOME/bin/start-tc-server.sh –f $PATH TO TERRACOTTA bin
D. None of the mentioned
Answer» B. $TERRACOTTA HOME/bin/start-tc-server.sh ‚Äö√Ñ√∂‚àö√ë‚àö¬®f $PATH TO TERRACOTTA
1273.

WE_NEED_TO_OBLIGATORILY_HAVE_VENTILATION_IN_TRIANGULAR_NOTCH.?$

A. True
B. False
Answer» C.
1274.

HOW_CAN_OUTPUT_BE_UPDATED_IN_NEURAL_NETWORK??$

A. synchronously
B. asynchronously
C. both synchronously & asynchronously
D. none of the mentioned
Answer» D. none of the mentioned
1275.

HOW_IS_INCREMENTAL_MODEL_DIFFERENT_FROM_SPIRAL_MODEL??$

A. Progress can be measured for Incremental Model
B. Changing requirements can be accommodated in Incremental Model
C. Users can see the system early in Incremental Model
D. All of the mentioned
Answer» B. Changing requirements can be accommodated in Incremental Model
1276.

THE_VALUE_OF_KS(MODULUS_OF_SUBGRADE_REACTION)_CAN_BE_FOUND_OUT,_BASED_ON_THE_EFFECT_OF___________?$

A. Size and Shape
B. Properties
C. None of the mentioned
D. All of the mentioned
Answer» B. Properties
1277.

SAMPLING_INTERVAL_T_IS_SELECTED_SUFFICIENTLY_LARGE_TO_COMPLETELY_AVOID_OR_AT_LEAST_MINIMIZE_THE_EFFECTS_OF_ALIASING.?$

A. True
B. False
Answer» C.
1278.

WHEN_TWO_SPUR_GEARS_HAVING_INVOLUTE_PROFILES_ON_THEIR_TEETH_ENGAGE,_THE_LINE_OF_ACTION_IS_TANGENTIAL_TO_THE?$

A. pitch circles
B. dedendum circles
C. addendum circles
D. base circles
Answer» B. dedendum circles
1279.

RAKE_ANGLE_OF_DRILL_IS_ALSO_AS?$

A. Taper angle
B. Friction angle
C. Helix angle
D. None of the mentioned
Answer» D. None of the mentioned
1280.

TOXIN_A_INVOLVED_IN_PSEUDOMEMBRANOUS_COLITIS_IS_A_TYPE_OF________________?$

A. endotoxin
B. enterotoxin
C. cytotoxin
D. neurotoxin
Answer» C. cytotoxin
1281.

THE_MATHEMATICAL_VALUE_OF_DOWN_COMER_BACKUP_IS??$

A. h<sub>c</sub> + h<sub>t</sub>+ h<sub>ad</sub>
B. h<sub>c</sub> – h<sub>t</sub>+ h<sub>ad</sub>
C. h<sub>c</sub> – h<sub>t</sub> – h<sub>ad</sub>
D. h<sub>c</sub> + h<sub>t</sub>
Answer» B. h<sub>c</sub> ‚Äö√Ñ√∂‚àö√ë‚àö¬® h<sub>t</sub>+ h<sub>ad</sub>
1282.

WHICH_OF_THE_FOLLOWING_SHORT-CUT_KEY_IS_USEFUL_FOR_MODIFYING_THE_3-DIMENSIONAL_VISUALIZATION_PROPERTIES??$

A. CTRL + 1
B. CTRL + 5
C. CTRL + 3
D. CTRL + 4
Answer» B. CTRL + 5
1283.

LMS_EQUALIZER_MINIMIZES___________?$

A. Computational complexity
B. Cost
C. Mean square error
D. Power density of output signal
Answer» D. Power density of output signal
1284.

A_CYLINDRICAL_CAVITY_OF_BASE_DIAMETER_15_CM_AND_HEIGHT_20_CM_HAS_INSIDE_SURFACE_TEMPERATURE_650_K._IF_EMISSIVITY_OF_EACH_SURFACE_IS_0.85,_DETERMINE_THE_NET_RADIATIVE_HEAT_TRANSFER_FROM_THE_CAVITY?$

A. 194 W
B. 184 W
C. 174 W
D. 164 W
Answer» D. 164 W
1285.

WHAT_IS_THE_MAXIMUM_LIMIT_(PPM)_FOR_TURBIDITY_IN_WATER??$

A. 500
B. 1000
C. 2000
D. 1500
Answer» E.
1286.

THE__________PUMP_UTILIZES_A_TUBE_IN_THE_SHAPE_OF_A_SEMI-CIRCLE_WITH_2_OR_MORE_PINCHING_ROLLERS_ON_THE_OUTER_EDGE_OF_A_WHEEL_THAT_ROTATES_ON_THE_INSIDE_OF_THE_SEMI-CIRCLE.?$

A. Gear
B. Teeth
C. Tubing
D. Lobe
Answer» D. Lobe
1287.

A_MECHANISM_FOR_BREAKING_THE_PROBLEM_DOWN_IS?$

A. Layering
B. Dividing
C. Abstraction
D. Entity sharing
Answer» D. Entity sharing
1288.

IN_THE_PROPORTIONING_PUMP,_TWO_SPEED_PUMP_HAS_A_NON-SYNCHRONOUS_______RPM_MOTOR.?$

A. 10 rpm
B. 30 rpm
C. 45 rpm
D. 15 rpm
Answer» D. 15 rpm
1289.

WHICH_OF_THE_FOLLOWING_TAKE_PART_IN_RELAXATION_OF_MUSCLES??$

A. Nebulin
B. Titin
C. Tropomodulin
D. Myomesin
Answer» C. Tropomodulin
1290.

WHICH_OF_THE_FOLLOWING_TRANSITION-TIMING-FUNCTION_PROPERTY_LETS_YOU_DEFINE_YOUR_OWN_VALUES_IN_A_CUBIC-BEZIER_FUNCTION?$

A. cubic(n,n,n,n)
B. matrix(n,n,n,n)
C. cubic-bezier(n,n,n,n)
D. none of the mentioned
Answer» D. none of the mentioned
1291.

A_ROLLBACK_TRANSACTION_STATEMENT_SPECIFYING_A_SAVEPOINT_NAME_RELEASES_ANY_LOCKS_THAT_ARE_ACQUIRED_BEYOND_THE_SAVEPOINT,_WITH_THE_EXCEPTION_OF:.?$

A. escalations
B. containment
C. contention
D. None of the mentioned
Answer» C. contention
1292.

HOW_MANY_ASSUMPTIONS_CAN_BE_USED_FOR_THE_SLOT_LEAKAGE_CALCULATION??$

A. 2
B. 3
C. 4
D. 5
Answer» C. 4
1293.

Convergence rate of LMS is fast. State whether True or False.$

A. True
B. False
Answer» C.
1294.

What is the formula of the effective permeance of conductor portion?$

A. effective permeance of conductor portion = 1/total flux linkages * total turns * total mmf
B. effective permeance of conductor portion = total flux linkages / total turns * total mmf
C. effective permeance of conductor portion = total flux linkages * total turns * total mmf
D. effective permeance of conductor portion = total flux linkages * total turns / total mmf
Answer» C. effective permeance of conductor portion = total flux linkages * total turns * total mmf
1295.

The volcanic sheets may vertical. State true or false.$

A. True
B. False
Answer» C.
1296.

Which element increases DBTT of steel?$

A. Ni
B. Mn
C. Al
D. Mo
Answer» E.
1297.

Corrosion in the pump is developed due to _______$

A. Pressure of air
B. Fluid properties
C. Draft tube
D. Tank dimensions
Answer» C. Draft tube
1298.

Which path of the components in wire EDM determines the path to be machined?$

A. Horizontal worktable movement
B. Vertical worktable movement
C. All of the mentioned
D. None of the mentioned
Answer» B. Vertical worktable movement
1299.

________ is controlled by varying ion flux and velocity$

A. doping density
B. doping thickness
C. doping rate
D. doping material
Answer» B. doping thickness
1300.

Choose the methods provided by Console.Out and Console.Error?$

A. Write
B. WriteLine
C. WriteKey
D. Write & WriteLine
Answer» D. Write & WriteLine