MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 2374 Mcqs, each offering curated multiple-choice questions to sharpen your Embedded Systems knowledge and support exam preparation. Choose a topic below to get started.
| 601. |
A Highest Common Factor of a, b is defined as ___________ |
| A. | It is the smallest integer divisible by both a and b |
| B. | It is the greatest integer divisor of both a and b |
| C. | It is the sum of the number a and b |
| D. | None of the mentioned |
| Answer» C. It is the sum of the number a and b | |
| 602. |
Objects that are 3 degrees below the horizon as viewed from the cockpit, appear at the _________ degree index on the HUD display. |
| A. | -300 |
| B. | +300 |
| C. | +3 |
| D. | −3 |
| Answer» E. | |
| 603. |
What is the full form of HDDs? |
| A. | Heading-down displays |
| B. | Heat-down displays |
| C. | Head-down displays |
| D. | Hill-down displays |
| Answer» D. Hill-down displays | |
| 604. |
The collimated images on the HUD combiner are perceived to be existing at or near the optical infinity. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 605. |
During the approach and landing, a pilot can fly the approach by keeping the FPV symbol at the desired _______ angle. |
| A. | Attack |
| B. | Descent |
| C. | Inclination |
| D. | Pitch |
| Answer» C. Inclination | |
| 606. |
Which of the following shows the wing’s angle relative to the airflow? |
| A. | Boresight |
| B. | Velocity vector symbol |
| C. | Angle of attack indicator |
| D. | Navigation data and symbols |
| Answer» D. Navigation data and symbols | |
| 607. |
Second gen head up displays use a solid state light source. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 608. |
Which of the following HUDs uses optical waveguides to produce images? |
| A. | Second generation HUDs |
| B. | First generation HUDs |
| C. | Third generation HUDs |
| D. | Fourth generation HUDs |
| Answer» D. Fourth generation HUDs | |
| 609. |
When was the modern HUD used in IFR approaches to landing, developed? |
| A. | 1999 |
| B. | 1905 |
| C. | 2005 |
| D. | 1975 |
| Answer» E. | |
| 610. |
Which of the following shows where the nose of the aircraft is actually pointing? |
| A. | Flight path vector |
| B. | Boresight |
| C. | Angle of attack indicator |
| D. | Acceleration indicator |
| Answer» C. Angle of attack indicator | |
| 611. |
What is the full form of LVTO? |
| A. | Least Virtual Take-off |
| B. | Least Visibility Take-off |
| C. | Low Virtual Take-off |
| D. | Low Visibility Take-off |
| Answer» E. | |
| 612. |
An AM signal is represented by x(t) = (30 + 2Sin(700πt)) Cos(2πt x 102t)V. What is its sideband power? |
| A. | 4W |
| B. | 1W |
| C. | 3W |
| D. | 2W |
| Answer» C. 3W | |
| 613. |
An AM signal is represented by x(t) = (30 + 2Sin(700πt)) Cos(2πt x 102t)V. Find the total power of amplitude modulated wave? |
| A. | 453W |
| B. | 675W |
| C. | 789W |
| D. | 451W |
| Answer» E. | |
| 614. |
An AM signal is represented by x(t) = (30 + 2Sin(700πt)) Cos(2πt x 102t)V. Carrier power of the wave is? |
| A. | 555W |
| B. | 675W |
| C. | 450W |
| D. | 310W |
| Answer» D. 310W | |
| 615. |
An AM signal is represented by x(t) = (30 + 2Sin(700πt)) Cos(2πt x 102t)V. What is the value of modulation index? |
| A. | 0.7 |
| B. | 0.066 |
| C. | 0.341 |
| D. | 0.916 |
| Answer» C. 0.341 | |
| 616. |
For getting 100% modulation, carrier amplitude should ________ |
| A. | exceed signal amplitude |
| B. | be equal to signal amplitude |
| C. | be lesser than signal amplitude |
| D. | be equal to 0 |
| Answer» C. be lesser than signal amplitude | |
| 617. |
The maximum power efficiency of an AM modulator is? |
| A. | 25% |
| B. | 33% |
| C. | 66% |
| D. | 100% |
| Answer» C. 66% | |
| 618. |
Overmodulation results in ________________ |
| A. | Distortion |
| B. | Weakens signal |
| C. | Strengthens the signal |
| D. | provides immunity to noise |
| Answer» B. Weakens signal | |
| 619. |
For 100% modulation, power in each sideband is ________ of that of carrier. |
| A. | 50% |
| B. | 70% |
| C. | 60% |
| D. | 25% |
| Answer» E. | |
| 620. |
Calculate power in each sideband, if power of carrier wave is 176W and there is 60% modulation in amplitude modulated signal? |
| A. | 13.36W |
| B. | 52W |
| C. | 67W |
| D. | 15.84W |
| Answer» E. | |
| 621. |
Which of these are not purchaser (stakeholder) goals? |
| A. | Pay the least for a product that meets irrigation needs |
| B. | Purchase a product that is cheap to operate |
| C. | Purchase a product that is cheap to maintain |
| D. | Have a product that is easy and fast to install |
| Answer» E. | |
| 622. |
Main item checked for errors while eliciting needs? |
| A. | Correctness |
| B. | Terminological Consistency |
| C. | Scope |
| D. | All of the mentioned |
| Answer» E. | |
| 623. |
Which of these statements justify needs documentation and analysis? |
| A. | Stakeholders-goals list is a catalog of important stakeholder categories and their goals |
| B. | A need list documents a single product feature, function, or property needed or desired by one or more stakeholders |
| C. | A need statement catalogs need statements |
| D. | All of the mentioned |
| Answer» B. A need list documents a single product feature, function, or property needed or desired by one or more stakeholders | |
| 624. |
Elicitation techniques include ____________ |
| A. | Interviews |
| B. | Observation |
| C. | Focus Groups |
| D. | All of the mentioned |
| Answer» E. | |
| 625. |
Which among these is not a heuristic for stakeholder’s needs elicitation? |
| A. | Determine stakeholder goal as the context of stakeholder needs and desires |
| B. | Study user tasks |
| C. | Learn about problem domain at the later stages |
| D. | All of the mentioned |
| Answer» D. All of the mentioned | |
| 626. |
Which of these is not a problem of stakeholder’s needs elicitation? |
| A. | Stakeholder’s are readily available to designers |
| B. | Unfocused questions usually produce a jumble of responses about different product aspects at different level of abstraction |
| C. | Stakeholder’s are unable to explain how they work, what they want from product |
| D. | Stakeholder’s misunderstands the limits and capabilities of technology |
| Answer» B. Unfocused questions usually produce a jumble of responses about different product aspects at different level of abstraction | |
| 627. |
The volcanic sheets may vertical. |
| A. | True |
| B. | False |
| Answer» C. | |
| 628. |
Pick the wrong statement about granitization. |
| A. | It is a set of processes rather than a single step |
| B. | It involves already existing sedimentary and other rocks |
| C. | It involves magmatic stage |
| D. | It doesn’t actually require magmatic stage |
| Answer» D. It doesn’t actually require magmatic stage | |
| 629. |
Majority of batholiths show which composition? |
| A. | Felsitic |
| B. | Granitic |
| C. | Ophitic |
| D. | Directive |
| Answer» C. Ophitic | |
| 630. |
The bodies which show both concordant and discordant relations are ______________ |
| A. | Dykes |
| B. | Sills |
| C. | Batholiths |
| D. | Phacoliths |
| Answer» D. Phacoliths | |
| 631. |
When the vents of quiet volcanoes become sealed with intrusions it leads to ______________ |
| A. | Dyke |
| B. | Batholith |
| C. | Extrusion |
| D. | Volcanic necks |
| Answer» E. | |
| 632. |
Dykes tend to occur individually. |
| A. | True |
| B. | False |
| Answer» C. | |
| 633. |
Texture shown by dykes is ______________ |
| A. | Equigranular |
| B. | Directive |
| C. | Intergrowth |
| D. | All types of textures |
| Answer» E. | |
| 634. |
The example not belonging to discordant body is ______________ |
| A. | Dykes |
| B. | Volcanic necks |
| C. | Bysmaliths |
| D. | Batholiths |
| Answer» D. Batholiths | |
| 635. |
The intrusive bodies in which injection of lava occurs without any influence of dip and strike is ______________ |
| A. | Concordant bodies |
| B. | Discordant bodies |
| C. | Non-cordant bodies |
| D. | Uncomformities |
| Answer» C. Non-cordant bodies | |
| 636. |
What are the characteristics of colonic release systems? |
| A. | Release the drug along the entire length of GIT |
| B. | Prolonged their residence in the GIT and release |
| C. | Usage of polymers that dissolves only in the alkaline pH of colon |
| D. | Use of enteric coating |
| Answer» D. Use of enteric coating | |
| 637. |
What are the characteristics of intestinal release systems? |
| A. | Release the drug along the entire length of GIT |
| B. | Prolonged their residence in the GIT and release |
| C. | Usage of polymers that dissolves only in the alkaline pH of colon |
| D. | Use of enteric coating |
| Answer» E. | |
| 638. |
Drugs cannot be delivered to the colon. |
| A. | True |
| B. | False |
| Answer» C. | |
| 639. |
Enteric coating are used for which systems? |
| A. | Intestinal release systems |
| B. | Colonic release systems |
| C. | Size based systems |
| D. | Mucoadhesive systems |
| Answer» B. Colonic release systems | |
| 640. |
What is the characteristics of mucoadhesive systems? |
| A. | Release the drug along the entire length of GIT |
| B. | Prolonged their residence in the GIT and release |
| C. | Usage of bio adhesive polymer |
| D. | Use of high or low density pellets |
| Answer» D. Use of high or low density pellets | |
| 641. |
What are the characteristics of floating or buoyant capsule systems? |
| A. | Release the drug along the entire length of GIT |
| B. | Granule drug with hydro gel |
| C. | Release only at a specific drug |
| D. | Use of high or low density pellets |
| Answer» C. Release only at a specific drug | |
| 642. |
What is the characteristics of altered density systems? |
| A. | Release the drug along the entire length of GIT |
| B. | Prolonged their residence in the GIT and release |
| C. | Release only at a specific drug |
| D. | Use of high or low density pellets |
| Answer» E. | |
| 643. |
Which of the following oral controlled release system is shown in the picture? |
| A. | Matrix system |
| B. | Encapsulated system |
| C. | Rigid matrix |
| D. | Swellable matrix |
| Answer» B. Encapsulated system | |
| 644. |
Which of the following is true for the given statements about numerical controlled CMM?Statement 1: Command like full 3D alignment is provided.Statement 2: Repeat function is used to simplify the inspection of features which are similar. |
| A. | T, T |
| B. | F, F |
| C. | F, T |
| D. | T, F |
| Answer» B. F, F | |
| 645. |
Which of the following option is true for given statements about numerical controlled CMM?Statement 1: Idle time of the production equipment is more.Statement 2: Software for automatic evaluation is incorporated. |
| A. | T, T |
| B. | F, F |
| C. | T, F |
| D. | F, T |
| Answer» E. | |
| 646. |
In which of the following numerical controlled CMM used? |
| A. | Workshops |
| B. | Production floors |
| C. | Workshop and production floors both |
| D. | Can be used anywhere |
| Answer» D. Can be used anywhere | |
| 647. |
The __________ attribute effectively renders the iframe as an inline include, which allows the parent document’s CSS to affect the contents of the iframe. |
| A. | allow-forms |
| B. | seamless |
| C. | embed |
| D. | allow-scripts |
| Answer» C. embed | |
| 648. |
Which of the following is not a type of attribute for input tag? |
| A. | day |
| B. | week |
| C. | month |
| D. | time |
| Answer» B. week | |
| 649. |
The _______ is a mixture of cement and sand, the usual proportion being 1:3. |
| A. | Mortar |
| B. | Slurry |
| C. | Gunite |
| D. | Concrete |
| Answer» D. Concrete | |
| 650. |
The ___________ is the most effective process of repairing concrete work which has been damaged due to inferior work or other reasons. |
| A. | Grouting |
| B. | Scraping |
| C. | Dewatering |
| D. | Guniting |
| Answer» E. | |