The system utilised to apply the H2O solution to the plate surface is – McqOptions

MCQOPTIONS

1.	The system utilised to apply the H2O solution to the plate surface is called the __________
A.	Dissociating system
B.	Dampening system
C.	H2O hating system
D.	Littering
Answer» D. Littering

Discussion

No Comment Found

Related MCQs

Dot gain in the mid tones is said to be about __________ lower than with conventional lithography.
__________ must be designed especially for this system to be effective; the principal difference is that the __________ vehicle that’s selected must give suitable rheological properties such as a fairly high viscosity.
The __________ balance in offset lithographic printing is critical. Also, the utilization of the dampening system complicates the press and its operation and adds to its initial cost.
The system utilised to apply the H2O solution to the plate surface is called the __________
The H2O solution utilised to prevent printing in the non-print areas is called the __________
The surface is treated with a __________ that is soaked into the image area, but avoided the H2O treated, non-image area.
___________MUST_BE_DESIGNED_ESPECIALLY_FOR_THIS_SYSTEM_TO_BE_EFFECTIVE;_THE_PRINCIPAL_DIFFERENCE_IS_THAT_THE____________VEHICLE_THAT‚ÄÖ√Ñ√∂‚ÀÖ√Ë‚ÀÖ¬•S_SELECTED_MUST_GIVE_SUITABLE_RHEOLOGICAL_PROPERTIES_SUCH_AS_A_FAIRLY_HIGH_VISCOSITY.?$#
Dot_gain_in_the_mid_tones_is_said_to_be_about____________lower_than_with_conventional_lithography.$
The __________ balance in offset lithographic printing is critical. Also, the utilization of the dampening system complicates the press and its operation and adds to its initial cost?
Most lithography is carried out as offset printing; the image on the ink plate is transferred to a rubber sheet and from the blanket to the paper.