The design equation of PBR to determine the weight of the catalyst is – McqOptions

MCQOPTIONS

1.	The design equation of PBR to determine the weight of the catalyst is ________
A.	\(\frac{W}{FA0} = \int_0^X \)-rA dX
B.	\(\frac{W}{FA0} = \int_0^X \frac{dX}{dV} \)
C.	W = FA0 \(\int_0^X \frac{dX}{-rA} \)
D.	W = \(\int_0^X \)FA0 dX
Answer» D. W = \(\int_0^X \)FA0 dX

Discussion

No Comment Found

Related MCQs

For a gaseous reaction carried out in 25 litre PFR with 5molA/lit and space time 3 mins. Calculate the conversion attained if reaction kinetics is given as followsA → 2.5P, -rA = (2 min-1) CA .
Calculate the volume of CSTR in litre required to achieve 70% conversion. The feed contains 10 molA/litre with feed rate of 3 lit/min and rate constant 0.15 for the reaction -rA = k(CA)1.5.
The performance equation for CSTR is_________a) \(\frac{τ}{CA0} = \frac{XA}{-rA} \) b) τ = \(\frac{XA}{-rA} \) c) τ = CA0 -rAd) τ = \(\frac{XA}{CA0(-r
Space time in terms of molar federate and initial concentration is _________
A space time of 10 minutes means __________
A space velocity of 7 hr-1 means ___________
In CSTR, the rate of reaction is evaluated at the exit conditions.
The design equation of PBR to determine the weight of the catalyst is ________
The design equation for a plug flow reactor is ___________
The differential form of the plug flow reactor design equation is ______