In a series resonance type BPF, C = 1.8 pf, L = 25 mH, RF = 52 Ω an – McqOptions

MCQOPTIONS

1.	In a series resonance type BPF, C = 1.8 pf, L = 25 mH, RF = 52 Ω and RL = 9 kΩ. The Bandwidth is ___________
A.	331 kHz
B.	575 kHz
C.	331 Hz
D.	575 Hz
Answer» D. 575 Hz

Discussion

No Comment Found

Related MCQs

A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary supplies 7 A current into a purely resistive burden of 2 Ω. The magnetizing ampere-turns are 300. The phase angle is?
A coil (which can be modelled as a series RL circuit) has been designed for a high Quality Factor (Q) performance. The voltage is rated at and a specified frequency. If the frequency of operation is increased 10 times and the coil is operated at the same rated voltage. The new value of Q factor and the active power P will be?
A 50 μF capacitor, when connected in series with a coil having a resistance of 40Ω, resonates at 1000 Hz. The inductance of the coil for the resonant circuit is ____________
In a series resonance type BPF, C = 1.8 pf, L = 25 mH, RF = 52 Ω and RL = 9 kΩ. The Bandwidth is ___________
In a series resonance type BPF, C = 1.8 pf, L = 25 mH, RF = 52 Ω and RL = 9 kΩ. The Resonant frequency f is __________
For the series circuit given below, the value of the cut-off frequencies are ____________
For the series resonant circuit given below, the bandwidth is ____________
For the series resonant circuit given below, the value of the quality factor is ___________
For the series resonant circuit shown below, the value of the resonant frequency is _________
For the resonant circuit given below, the value of the quality factor of the circuit is __________