Bulk modulus was first defined by [CPMT 1987]

1.	Bulk modulus was first defined by [CPMT 1987]
A.	Young
B.	Bulk
C.	Same amount of electric current would pass through both the pieces producing more heat in the thicker one.
D.	None of the above
Answer» D. None of the above

Discussion

No Comment Found

Related MCQs

The stress-strain curves for brass, steel and rubber are shown in the figure. The lines A, B and C are for
The graph shown was obtained from experimental measurements of the period of oscillations T for different masses M placed in the scale pan on the lower end of the spring balance. The most likely reason for the line not passing through the origin is that the [NCERT 1978]
An elastic material of Young's modulus Y is subjected to a stress S. The elastic energy stored per unit volume of the material is [MP PET 1991; MP PMT 1990, 96; IIT 1992; AIIMS 1997]
Two rods of different materials having coefficients of linear expansion \[{{\alpha }_{1}},\,{{\alpha }_{2}}\] and Young's moduli \[{{Y}_{1}}\] and \[{{Y}_{2}}\] respectively are fixed between two rigid massive walls. The rods are heated such that they undergo the same increase in temperature. There is no bending of rods. If \[{{\alpha }_{1}}:{{\alpha }_{2}}=2:3\], the thermal stresses developed in the two rods are equally provided \[{{Y}_{1}}:{{Y}_{2}}\] is equal to [IIT 1989]
The compressibility of water is \[4\times {{10}^{-5}}\] per unit atmospheric pressure. The decrease in volume of 100 cubic centimeter of water under a pressure of 100 atmosphere will be [MP PMT 1990]
The pressure of a medium is changed from 1.01 ´ 105 Pa to 1.165 ´ 105 Pa and change in volume is 10% keeping temperature constant. The Bulk modulus of the medium is
The adiabatic elasticity of a gas is equal to\[\] [CPMT 1982]
The bulk modulus of an ideal gas at constant temperature [MP PMT 2004]
Bulk modulus was first defined by [CPMT 1987]
Assertion : Spring balances show correct readings even after they had been used for a long time interval. Reason : On using for long time, spring balances losses its elastic strength.

Bulk modulus was first defined by [CPMT 1987]

Discussion

No Comment Found

Related MCQs

Reply to Comment