A liquid flows through a pipe of 100 mm diameter at a velocity of 1 m/s. If the diameter is guaranteed within ±1% and the velocity is known to be within ±3% of measured value, the limiting error for the rate of flow is

A liquid flows through a pipe of 100 mm diameter at a velocity of 1 m/

1.	A liquid flows through a pipe of 100 mm diameter at a velocity of 1 m/s. If the diameter is guaranteed within ±1% and the velocity is known to be within ±3% of measured value, the limiting error for the rate of flow is
A.	±1%
B.	±2%
C.	±3%
D.	±5%
Answer» E.

Discussion

No Comment Found

Related MCQs

In a parallel circuit having two branches, the current in one branch is I1 = 100 ± 2 A and in the other is I2 = 200 ± 5 A. Considering errors in both I1 and I2 as limiting errors, the total current will be
A 0 – 10 A ammeter has a guaranteed accuracy of 1 percent of full scale deflection. What will be the limiting error in the reading of 2.5 A?
Calculate the relative error wherein the measured value of the capacitor is 204.3 μF, whereas its true value is 201.4 μF.
Four ammeters M1, M2, M3 and M4 with the following specifications are available. (Full scale, accuracy value as percentage of FS)M1 = 20 ± 0.10M2 = 10 ± 0.20M3 = 5 ± 0.50M4 = 1 ± 1.00A current 1 A is to be measured to obtain minimum error in the reading one should select the meter
A liquid flows through a pipe of 100 mm diameter at a velocity of 1 m/s. If the diameter is guaranteed within ±1% and the velocity is known to be within ±3% of measured value, the limiting error for the rate of flow is
A 200 milli-Ampere meter has accuracy of ± 0.5 percent. Its accuracy while reading 100 milli-Ampere will be
An 820 Ω resistance with an accuracy of ± 10% carries a current of 10 mA. The current was measured by an analog meter of 25 mA range with an accuracy of ± 2% of full scale. The accuracy in the measurement of power dissipated in the resistor is
A meter reads 125 V and the true value of the voltage is 125.5 V. Find the static error of the instrument.
In any device, the difference between the measured value & true value is referred as
An ammeter of range 0-25 Amp has an accuracy of 1% of full scale reading. The current measured by the ammeter is 5 Amp. The limiting error in the reading is:

A liquid flows through a pipe of 100 mm diameter at a velocity of 1 m/s. If the diameter is guaranteed within ±1% and the velocity is known to be within ±3% of measured value, the limiting error for the rate of flow is

Discussion

No Comment Found

Related MCQs

Reply to Comment