A coil is designed for high Q performance at a rated voltage and a spe – McqOptions

MCQOPTIONS

1.	A coil is designed for high Q performance at a rated voltage and a specified frequency. If the frequency is made twice the original and the coil is operated at the same rated voltage, then the Q factor will be affected as ____________
A.	Q is halved
B.	Q remains unchanged
C.	Q is doubled
D.	Q increases or decreases but magnitude cannot be measured
Answer» D. Q increases or decreases but magnitude cannot be measured

Discussion

No Comment Found

Related MCQs

The relation between the Q factor of a coil measured by the Q Meter and the actual Q of the coil is _________
The average power absorbed by an impedance Z = 30 j 70 when a voltage V = 120 0 is applied is _____________
A current of [2 + ( sqrt{2} )sin (314t + 30) + 2 ( sqrt{2} )cos (952t +45)] is measured with a thermocouple type, 5A full scale, class 1 meter. The meter reading would lie in the range?
A (350 A/7A), 50 Hz current transformer has a primary bar. The secondary has a pure resistance of 1 . It also draws a current of 5 A. The magnetic core requires 350 AT for magnetization. Find the percentage ratio error.
The inductance of a certain moving- iron ammeter is expressed as L = 10 + 3 ( frac{ ^2}{4} ) H, where is the deflection in radian from the zero position. The control spring torque is 25 10-6 Nm/rad. If the meter is carrying a current of 5 A, the deflection is ____________
A coil is designed for high Q performance at a rated voltage and a specified frequency. If the frequency is made twice the original and the coil is operated at the same rated voltage, then the active power P will be affected as ____________
A coil is designed for high Q performance at a rated voltage and a specified frequency. If the frequency is made twice the original and the coil is operated at the same rated voltage, then the Q factor will be affected as ____________