A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary – McqOptions

MCQOPTIONS

1.	A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary supplies 7 A current into a purely resistive burden of 2 . The magnetizing ampere-turns are 300. The phase angle is?
A.	3.1
B.	85.4
C.	94.6
D.	175.4
Answer» B. 85.4

Discussion

No Comment Found

Related MCQs

The CT supplies current to the current coil of a wattmeter power factor meter, energy meter and, an ammeter. These are connected as?
Usually a CT has ____________
The observation when the secondary winding of a current transformer is open-circuited is?
A (350 A/ 7A), 50 Hz current transformer has a primary bar. The secondary burden is a pure resistance of 1 and it draws a current of 5 A. The magnetic core requires 350 AT for magnetization. Find the percentage ratio error.
A 200/1 Current Transformer (CT) is wound with 400 turns on the secondary on a toroidal core. When it carries a current of 180 A on the primary, the ratio is found to be -0.5%. If the number of secondary turns is reduced by 1, the new ratio error (in %) will be?
A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 2 . What is the ratio error, if the iron loss is 3 W and magnetizing mmf is 250 A?
A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 1.6 . The flux in the core at full load is?
A 50 Hz, bar primary CT has a secondary with 500 turns. The secondary supplies 5 A current into a purely resistive burden of 1 . The magnetizing ampere-turns are 200. What is the ratio error at full load, if the iron loss is 1.5 W and magnetizing mmf is 100 A?
A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary supplies 7 A current into a purely resistive burden of 2 . The magnetizing ampere-turns are 300. The phase angle is?