Explore topic-wise MCQs in Csharp.

This section includes 1967 Mcqs, each offering curated multiple-choice questions to sharpen your Csharp knowledge and support exam preparation. Choose a topic below to get started.

1351.

Ruby mica is more commonly known as ______

A. Muscovite
B. Phlogopite
C. Urethane
D. Neoprene
Answer» B. Phlogopite
1352.

Which of the following is the comparison operator in tuple relational calculus

A. ‚áí
B. =
C. ε
D. All of the mentioned
Answer» E.
1353.

By what percentage the reverse saturation current increases with 10 C rise in the temperature.

A. 25%
B. 12.5%
C. 50%
D. 7%
Answer» E.
1354.

The cam and follower is an example of

A. sliding pair
B. rolling pair
C. lower pair
D. higher pair
Answer» E.
1355.

Cu Kα radiation can ionize 1s electrons in which of the following elements?$

A. Cobalt
B. Helium
C. Nickel
D. Hydrogen
Answer» B. Helium
1356.

Which of the following is widely used for connecting coaxial cables test instruments?

A. PL-259
B. N-type connector
C. SMA
D. BNC
Answer» E.
1357.

In case of damaged prestressed concrete I girders which are used for restoring strength?

A. Pretensioning
B. Post tensioning
C. Chemicals
D. Dies
Answer» C. Chemicals
1358.

Which of the following conditions will give slow waves with high amplitude?

A. Hypoglycemia
B. Hypothermia
C. Hypocapnia
D. Low Glucocorticoids
Answer» D. Low Glucocorticoids
1359.

A data acquisition system provides __________

A. partial communication
B. ineffective communication
C. effective communication
D. complete communication
Answer» D. complete communication
1360.

Which of the following statements regarding the mechanism of transformation in Bacillus subtilis is false?

A. A competent bacteria contains a DNA receptor/translocation complex
B. While translocation of exogenous DNA, both strands gets passage into the cell
C. While translocation of exogenous DNA, only one strand gets passage into the cell
D. The exogenous DNA recombines and incorporates itself in the chromosome of the recipient cell.
Answer» C. While translocation of exogenous DNA, only one strand gets passage into the cell
1361.

Transport delay

A. Inertial delay
B. Delta delay
C. Wire delay
Answer» D.
1362.

Southern blotting technique is used in

A. Monoclonal antibody production
B. In vitro culture
C. Genetic finger printing
D. Polymerase chain reaction
Answer» D. Polymerase chain reaction
1363.

Which one of the following is more efficient in terms of the file size reduction?

A. YUI
B. Closure Compiler (advanced)
C. Minify
D. Closure Compiler (simple)
Answer» C. Minify
1364.

What is the main reason for ozone depletion?

A. Releasing of oxygen
B. Releasing of chemicals
C. Releasing of CFCs
D. Releasing of nitrogen
Answer» D. Releasing of nitrogen
1365.

Which among the following is the important commercial use of polyvinyl butyral?

A. film forming technology
B. safety glass interlayer
C. textile and paper treatment
D. decorative laminates
Answer» C. textile and paper treatment
1366.

What is the product of the ratio of the current and the useful flux per pole?

A. product of ratio of current and useful per pole = (useful flux per pole due to upper limit current * upper limit current) / (useful flux per pole due to lower limit current * lower limit current)
B. product of ratio of current and useful per pole = (useful flux per pole due to upper limit current + upper limit current) / (useful flux per pole due to lower limit current + lower limit current)
C. product of ratio of current and useful per pole = (useful flux per pole due to upper limit current – upper limit current) / (useful flux per pole due to lower limit current – lower limit current)
D. product of ratio of current and useful per pole = (useful flux per pole due to upper limit current * lower limit current) / (useful flux per pole due to lower limit current * upper limit current)
Answer» E.
1367.

Which of the following is not a project factor that should be considered when planning the structure of software engineering teams?

A. The difficulty of the problem to be solved
B. High frustration caused by personal, business, or technological factors that causes friction among team members
C. The degree of sociability required for the project
D. The rigidity of the delivery date
Answer» D. The rigidity of the delivery date
1368.

What process is used in semiconductor industry to fabricate Integrated Circuits?

A. Silicon wafer preparation
B. Silicon planar process
C. Epitaxial growth of silicon
D. Photolithography process
Answer» C. Epitaxial growth of silicon
1369.

The discharge through a reaction radial flow turbine is given by____________

A. P1*b1*Vf1
B. P2*b2*Vf2
C. P1*b2*Vf2
D. Both a & b
Answer» E.
1370.

The numbers that are prefixed with ‘0x’ are in base __________$

A. 8
B. 16
C. 32
D. 64
Answer» C. 32
1371.

Axis symmetric objects require minimum _______

A. one view
B. two views
C. three views
D. four views
Answer» C. three views
1372.

Why an energy storage device is provided on on-load tap changing transformers?

A. To ensure transition is started
B. To store additional energy
C. To ensure that transition once started is completed
D. To check the extra energy produced due to transition
Answer» D. To check the extra energy produced due to transition
1373.

Table rolls are freely revolving rolls under the _________ wire that support the weight of the wire and wet web.

A. Heatbox
B. Headbox
C. Aluminator
D. Fourdrinier
Answer» E.
1374.

If the number of cycles in trial cycle method is 20, for traffic of 170 on one road and 160 on other road, then calculate the total green time in sec

A. 38
B. 39
C. 40
D. 41
Answer» E.
1375.

Skin effect refers ________

A. the increase of wire resistance with frequency
B. the decrease of wire resistance with frequency
C. the uniform nature of wire resistance with frequency
D. the way radio signals travel across a flat surface
Answer» B. the decrease of wire resistance with frequency
1376.

The relation between temperature and diffusion coefficient is:

A. Linear
B. Exponential
C. Sinusoidal
D. Diffusion coefficient is not related to temperature
Answer» C. Sinusoidal
1377.

The initial percentage of water content taken for coarse-grained soil in proctor test is__________

A. 4
B. 10
C. 25
D. 50
Answer» B. 10
1378.

Which of the following is the disadvantages of this concrete?

A. Lightweight
B. Low strength
C. Low shrinkage
D. Good thermal insulating property
Answer» C. Low shrinkage
1379.

Which of the following is incorrect regarding sequence homology?

A. Two sequences can homologous relationship even if have do not have common origin
B. It is an important concept in sequence analysis
C. When two sequences are descended from a common evolutionary origin, they are said to have a homologous relationship
D. When two sequences are descended from a common evolutionary origin, they are said to share homology
Answer» B. It is an important concept in sequence analysis
1380.

Two lungs are of the same size.

A. True
B. False
Answer» C.
1381.

If a square is placed on its base parallel to horizontal plane, and plane containing square is perpendicular to horizontal plane and inclined to vertical plane then the top view gives a line of length equal to side of square.

A. True
B. False
Answer» B. False
1382.

The exponential distribution is used in reliability engineering as a model of the time to failure of a system. The parameter λ is called _____ in this application.$

A. Failure rate
B. MTF
C. Hazard rate
D. MTBF
Answer» B. MTF
1383.

Sample applications to illustrate XML functionality in SQL Server are:

A. Implementing XML in SQL Server
B. XmlOnlineCatalog
C. XmlSurvey
D. All of the mentioned
Answer» E.
1384.

Let τa( f(x)) denote the Taylor series of the polynomial f(x) centered at a. Which of the following exactly happens after the Taylor series is formed.$

A. τa( f(x)) = f(x)
B. The Taylor series has the effect of scaling GRAPH OF f(x)
C. The Taylor series transforms the origin
D. Scaled up graph obtained by factor of a
Answer» B. The Taylor series has the effect of scaling GRAPH OF f(x)
1385.

The ____________ method must create a new clipping region by calculating the intersection of the current clipping region and the area described by the current path, using the non-zero winding number rule.

A. fill()
B. stroke()
C. clip()
D. get()
Answer» D. get()
1386.

What is the optimum range of operating pressure inside the Hydro-former?

A. 14-15 atm
B. 1-5 atm
C. 5-10 atm
D. 10-12 atm
Answer» B. 1-5 atm
1387.

The increase in internal energy of a system is equal to the work done in the system. Which process does the system undergo?

A. Isochoric
B. Adiabatic
C. Isobaric
D. Isothermal
Answer» C. Isobaric
1388.

Negative limiting values cannot be applied to logarithmic functions in MATLAB.

A. True
B. False
Answer» B. False
1389.

A raised edge at the side of the roadway is known as _____________

A. curb
B. curvature
C. inclination
D. circular
Answer» B. curvature
1390.

Processor which is complex and expensive to produce _________

A. RISC
B. EPIC
C. CISC
D. multi-core
Answer» D. multi-core
1391.

With one account in Intel IoT Analytics, how many devices can be connected?

A. 3,000 devices
B. 5,000 devices
C. Infinite
D. 7,000 devices
Answer» D. 7,000 devices
1392.

The photomultiplier tube used is absorption meter is coated with which of the following materials?

A. Sodium
B. Potassium
C. Phosphorous
D. Chlorine
Answer» D. Chlorine
1393.

Which of the following mutation will lead to AT->GC transition?

A. Nitrous acid acting on A
B. Nitrous acid on C
C. Hydroxylation of C
D. Methylation of G
Answer» B. Nitrous acid on C
1394.

Which type of circulation is incurred in Schmidt-Hartmann boiler?

A. Natural circulation
B. Positive forced circulation
C. Forced circulation
D. Once-through circulation
Answer» B. Positive forced circulation
1395.

The rate at which atoms jumps from ______ is greater than that in the opposite direction.

A. convex side to concave side of the grain
B. surface high strain energy to surface of low strain energy
C. grain at higher temperature to grain at lower temperature
D. concave side to convex side of the grain
Answer» B. surface high strain energy to surface of low strain energy
1396.

Level crossing rate is a function of _______

A. Power transmitted by base station
B. Power density of receiver
C. Mobile speed
D. Bit error rate
Answer» D. Bit error rate
1397.

How compounding level in a compound machine is adjusted?

A. By adding variable resistance in series with series field resistance
B. By adding variable resistance in parallel with series field resistance
C. By adding fixed resistance in parallel with series field resistance
D. By adding fixed resistance in series with series field resistance
Answer» C. By adding fixed resistance in parallel with series field resistance
1398.

When a TE10 wave is incident on port 4 of a magic-T, all the power is coupled to port 1.

A. true
B. false
Answer» C.
1399.

Calculate the loss tangent when the dielectric constant in AC field is given by 3 + 2j.

A. (2/3)
B. (3/2)
C. (-3/2)
D. (-2/3)
Answer» E.
1400.

The TLB is incorporated as part of the _________

A. Processor
B. MMU
C. Disk
D. RAM
Answer» C. Disk