Explore topic-wise MCQs in Testing Subject.

This section includes 657 Mcqs, each offering curated multiple-choice questions to sharpen your Testing Subject knowledge and support exam preparation. Choose a topic below to get started.

1.

Specific weight of water at 4°C is ____________ N/m³.

A. 9810
B. 9760
C. 9950
D. 9865
Answer» B. 9760
2.

_______ fluids are practical fluids

A. Ideal
B. Real
C. Vortex
D. Newtonian
Answer» C. Vortex
3.

Air and water are the examples of ___________

A. Non Newtonian fluids
B. Vortex fluids
C. Real fluids
D. Ideal fluids
Answer» E.
4.

In an ideal fluid, the ____________ stresses are pretend to be absent.

A. Bending
B. Shearing
C. Tensile
D. Compressive
Answer» C. Tensile
5.

In cantilever beam the deflection occurs at ______

A. Free end
B. Point of loading
C. Through out
D. Fixed end
Answer» B. Point of loading
6.

The inverse of specific weight of a fluid is __________

A. Specific gravity
B. Specific Volume
C. Compressibility
D. Viscosity
Answer» C. Compressibility
7.

Compute the maximum deflection at free end of a cantilever beam subjected to udl for entire span of l metres.

A. wl⁴/8EI
B. wl⁴/4EI
C. wl³/8EI
D. wl²/6EI
Answer» B. wl⁴/4EI
8.

Calculate the maximum deflection of a cantilever beam with udl on entire span of 3m the intensity of you udl be 25 kN/m. Take EI as 4000 kN/m².

A. 0.052m
B. 0.063m
C. 0.076m
D. 0.09m
Answer» C. 0.076m
9.

Specific gravity of water is __________

A. 0.8
B. 1
C. 1.2
D. 1.5
Answer» C. 1.2
10.

Nutrients like ca, mg, si, al, S, K are lost due to ____________

A. Soil erosion
B. Percolation
C. Water logging
D. Watershed
Answer» C. Water logging
11.

Calculate the specific gravity of mercury.

A. 12.5
B. 14.7
C. 13.6
D. 11.8
Answer» D. 11.8
12.

Which of the following is not a soil moisture conservation method?

A. Spreading manure
B. Crop rotation
C. Recharge to ground water
D. By mulches
Answer» D. By mulches
13.

____________ reduces storm water discharge.

A. Rain water harvesting
B. Water harvesting
C. Watershed
D. Watershed management
Answer» C. Watershed
14.

The land where all the water comes from ___________

A. Ridge dam
B. Watershed
C. Meander
D. Groynes
Answer» C. Meander
15.

Tail escape is also called as ___________

A. Outlet
B. Cross regulator
C. Weir type escape
D. Surplus escape
Answer» D. Surplus escape
16.

The maximum ____ should not exceed the permissible limit to the span of the beam.

A. Slope
B. Deflection
C. Load
D. Bending moment
Answer» C. Load
17.

The ratio of maximum deflection of a beam to its ___________ is called stiffness of the beam.

A. Load
B. Slope
C. Span
D. Reaction at the support
Answer» D. Reaction at the support
18.

Stiffness of the beam is inversely proportional to the _____ of the beam.

A. Slope
B. Support reaction
C. Deflection
D. Load
Answer» D. Load
19.

Gold, Copper and lead are the examples of ______

A. Ductility
B. Creep
C. Plasticity
D. Malleability
Answer» D. Malleability
20.

Warabandi has been practiced in India for more than ____________ years.

A. 130 years
B. 125 years
C. 140 years
D. 145 years
Answer» C. 140 years
21.

The maximum deflection in cantilever beam of span “l”m and loading at free end is “W” kN.

A. Wl³/2EI
B. Wl³/3EI
C. Wl³/4EI
D. Wl²/2EI
Answer» C. Wl³/4EI
22.

Which of the following method is not used for determining slope and deflection at a point?

A. Moment area method
B. Double integration method
C. Isoheytal method
D. Macaulay’s method
Answer» D. Macaulay’s method
23.

Elastic curve is also known as __________

A. Refraction curve
B. Reflection curve
C. Deflection curve
D. Random curve
Answer» D. Random curve
24.

A simply supported beam of span as shown in the figure is subjected to a concentrated load w at its metre span and also to a uniformly distributed load equality w what is the total diffraction it its midpoint.

A. 18 Wl³ /384 EI
B. 13 Wl³/ 384 EI
C. 5 Wl³/ 384 EI
D. 18 Wl³/ 384 EI
Answer» C. 5 Wl³/ 384 EI
25.

Slope in the beam at any point is measured in ____________

A. Degrees
B. Minutes
C. Radians
D. Metric tonnes
Answer» D. Metric tonnes