MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 203 Mcqs, each offering curated multiple-choice questions to sharpen your BBA in Computer Applications knowledge and support exam preparation. Choose a topic below to get started.
| 51. |
Routing and scheduling is difficult in this_________ manufacturing system. |
| A. | continuous. |
| B. | intermittent. |
| C. | hybrid. |
| D. | job shop. |
| Answer» E. | |
| 52. |
More textile mills in Coimbatore is mainly due to _________. |
| A. | no other industry can be setup in this area. |
| B. | regulation by govt. |
| C. | climate. |
| D. | power supply. |
| Answer» D. power supply. | |
| 53. |
Which of the following is not a computerized technique for layout planning? |
| A. | cad. |
| B. | aldep. |
| C. | craft . |
| D. | corelap. |
| Answer» B. aldep. | |
| 54. |
The competitive advantage in the production function can be achieved through_________. |
| A. | high wastages. |
| B. | more cost. |
| C. | higher quality. |
| D. | lowest quantity. |
| Answer» D. lowest quantity. | |
| 55. |
The advantage of locating a plant in urban (city) side is __________. A. cheap |
| A. | ailability of land. |
| B. | disposal of waste is easy. |
| C. | cost of operation is low. |
| D. | large markets for finished products. |
| Answer» E. | |
| 56. |
The therblig symbol used for micro motion of "release' is _______________. |
| A. | r. |
| B. | re. |
| C. | rl. |
| D. | rs. |
| Answer» D. rs. | |
| 57. |
In a __________ Layout all machines or process of the same type are groupedtogether. |
| A. | fixed position. |
| B. | factory. |
| C. | process. |
| D. | product. |
| Answer» D. product. | |
| 58. |
The symbol of rectangle shape represents the process of ________ in the processanalysis. |
| A. | transportation |
| B. | transportation |
| C. | inspection |
| D. | delay |
| Answer» D. delay | |
| 59. |
which is not a part of 5R's of buying? |
| A. | right quality. |
| B. | right quantity. |
| C. | right source. |
| D. | none of the above. |
| Answer» E. | |
| 60. |
Every foot of available space should be used effectively is a principle of_________. |
| A. | sequence. |
| B. | safety. |
| C. | flexibility. |
| D. | usage. |
| Answer» E. | |
| 61. |
Current trends in operations management include all of the following except______________. |
| A. | just-in-time performance. |
| B. | rapid product development. |
| C. | mass customization. |
| D. | mass production. |
| Answer» E. | |
| 62. |
Ship Building and Aircraft manufacturing is an example of ________ type oflayout . |
| A. | combined. |
| B. | matrix. |
| C. | fixed. |
| D. | group. |
| Answer» D. group. | |
| 63. |
Supervision required is more in ______ manufacturing system. |
| A. | continuous. |
| B. | intermittent. |
| C. | hybrid. |
| D. | job shop. |
| Answer» E. | |
| 64. |
A control chart based on known parameter values is_________. |
| A. | more advantageous than the one based on estimated values. |
| B. | complicated than that of control chart based on estimated values . |
| C. | less reliable than the control chart based on estimated values. |
| D. | less reliable than the control chart based on calculated values. |
| Answer» B. complicated than that of control chart based on estimated values . | |
| 65. |
Supplier rating system is also referred to as a _________used to obtain an over allrating of suppliers performance. |
| A. | score card system. |
| B. | open ended system . |
| C. | credit card system . |
| D. | sub system. |
| Answer» B. open ended system . | |
| 66. |
___________ formulates long term plans for the organization. |
| A. | staff members. |
| B. | business executives. |
| C. | chief executives. |
| D. | board members. |
| Answer» D. board members. | |
| 67. |
Budgeting, paying the bills, and collection of funds are activities associated withthe _________________. |
| A. | management function. |
| B. | control function. |
| C. | finance/accounting function. |
| D. | production/operations function. |
| Answer» D. production/operations function. | |
| 68. |
______________ type of layout are suitable for non repetitive or standard types ofproduction . |
| A. | process. |
| B. | product |
| C. | group. |
| D. | matrix. |
| Answer» B. product | |
| 69. |
________________ ensures that, the work is carried out as per the plan anddelivery schedules are met. |
| A. | expediting. |
| B. | dispatching. |
| C. | evaluating. |
| D. | loading. |
| Answer» B. dispatching. | |
| 70. |
___________ dimensions of business definition specify what activities are to beundertaken to produce and deliver products/services. |
| A. | product dimension. |
| B. | technology dimension. |
| C. | functional dimension. |
| D. | process dimension. |
| Answer» C. functional dimension. | |
| 71. |
Productivity measurement is complicated by _____________. |
| A. | the competition\s output . |
| B. | the fact that precise units of measure are often unavailable . |
| C. | stable quality . |
| D. | the workforce size . |
| Answer» C. stable quality . | |
| 72. |
_____________ function of production planning and control decides the quantityof output to be produced and the cost involved in it on the basis of sales forecast. |
| A. | expediting. |
| B. | loading. |
| C. | estimating. |
| D. | scheduling. |
| Answer» D. scheduling. | |
| 73. |
___________ is the ratio of available goods and services to the potential resourcesof the community or the country. |
| A. | purchasing power. |
| B. | simulation. |
| C. | productivity. |
| D. | demography. |
| Answer» B. simulation. | |
| 74. |
________ type of layout is a combination of functional layout and line layout. |
| A. | cellular. |
| B. | group. |
| C. | product. |
| D. | process. |
| Answer» C. product. | |
| 75. |
Congestion is more in ________ layout. |
| A. | process. |
| B. | product. |
| C. | fixed. |
| D. | cellular. |
| Answer» B. product. | |
| 76. |
______________ material handling device is used to move the material of differentsizes and weights. |
| A. | industrial trucks. |
| B. | trolley. |
| C. | crawlers. |
| D. | cranes. |
| Answer» E. | |
| 77. |
Budgeting, paying the bills, and collection of funds are activities associated withthe ______________. |
| A. | management function |
| B. | control function |
| C. | finance/accounting function |
| D. | production/operations function |
| Answer» D. production/operations function | |
| 78. |
The service sector has lower productivity improvements than the manufacturingsector because ___________. |
| A. | the service sector uses less skilled labor than manufacturing . |
| B. | the quality of output is lower in services than manufacturing . |
| C. | services usually are labor intensive . |
| D. | service sector productivity is hard to measure . |
| Answer» D. service sector productivity is hard to measure . | |
| 79. |
_____________ attempts to provide an understanding about the objectives that afirm is set out to achieve. |
| A. | strategic planning. |
| B. | strategic intent. |
| C. | strategic management. |
| D. | strategic decisions. |
| Answer» C. strategic management. | |
| 80. |
__________ is the first step in method study. |
| A. | examine the facts. |
| B. | record the present method. |
| C. | develop best method. |
| D. | select the work to study. |
| Answer» E. | |
| 81. |
The 4Ms does not include___________. |
| A. | men. |
| B. | material. |
| C. | message. |
| D. | machinery. |
| Answer» D. machinery. | |
| 82. |
________ function of production planning and control determines the starting timeand finishing time for each operation. |
| A. | routing. |
| B. | loading. |
| C. | scheduling. |
| D. | controlling. |
| Answer» C. scheduling. | |
| 83. |
___________ is the third step in the production planning and control. |
| A. | routing. |
| B. | scheduling. |
| C. | expediting. |
| D. | dispatching. |
| Answer» E. | |
| 84. |
The function of _______________ involves the decision when, what,how, and whyto produce goods. |
| A. | production planning. |
| B. | production control. |
| C. | method analysis. |
| D. | quality control. |
| Answer» B. production control. | |
| 85. |
The manager of inventory would most likely be found in the __________. |
| A. | finance function. |
| B. | marketing function. |
| C. | manufacturing function. |
| D. | information system function. |
| Answer» D. information system function. | |
| 86. |
Grouping together of like machines in one department is in _______ layout. |
| A. | product. |
| B. | process. |
| C. | group. |
| D. | parallel. |
| Answer» C. group. | |
| 87. |
Which of the following functions is not a core function of an organization? |
| A. | the marketing (including sales) function. |
| B. | the operations function. |
| C. | the accounting and finance function. |
| D. | the product/service development function. |
| Answer» D. the product/service development function. | |
| 88. |
In intermittent manufacturing system the goods are produced for __________. |
| A. | storing. |
| B. | processing. |
| C. | order. |
| D. | own consumption. |
| Answer» D. own consumption. | |
| 89. |
______ is a vital aspect of the managerial process. |
| A. | controlling. |
| B. | communication. |
| C. | performance-appraisal. |
| D. | merit rating. |
| Answer» C. performance-appraisal. | |
| 90. |
Production is the process by which raw materials and other inputs are converted into ______________. |
| A. | finished product. |
| B. | services. |
| C. | satisfaction. |
| D. | loyalty. |
| Answer» B. services. | |
| 91. |
Current trends in operations management include all of the following except______. |
| A. | just-in-time performance. |
| B. | rapid product development. |
| C. | mass customization. |
| D. | mass production. |
| Answer» E. | |
| 92. |
_____________ is one of the functions of materials management. |
| A. | selling finished goods. |
| B. | collection of bad debts. |
| C. | receiving and warehousing. |
| D. | managing cash flows. |
| Answer» D. managing cash flows. | |
| 93. |
A sequential sampling plan is ________. |
| A. | an infinite process. |
| B. | the process requiring much more sampling units than a fixed sized sample. |
| C. | a process in which sampling terminates with probability one . |
| D. | a finite process. |
| Answer» D. a finite process. | |
| 94. |
__________ in the production planning and control is checking of work and takingcorrective steps to ensure that each piece of work is completed at the right time. |
| A. | expediting. |
| B. | dispatching. |
| C. | routing. |
| D. | scheduling. |
| Answer» B. dispatching. | |
| 95. |
The first activity of purchasing cycle is _________. |
| A. | communicating requirement to the purchase. |
| B. | source selection and development. |
| C. | recognizing the need for procurement. |
| D. | inspection of goods. |
| Answer» D. inspection of goods. | |
| 96. |
The legal functions that board of directors of any company are described in_______. |
| A. | partnership act. |
| B. | companies act. |
| C. | mrtp act. |
| D. | indian companies act. |
| Answer» E. | |
| 97. |
_________is carried out to verify whether a quality system is effective andsuitable. |
| A. | quality audit. |
| B. | quality assurance audit. |
| C. | quality verification. |
| D. | quality analysis. |
| Answer» B. quality assurance audit. | |
| 98. |
The decision in a sequential sampling scheme is taken ______. |
| A. | after inspecting the sample as a whole. |
| B. | after selection and inspection of items one by one. |
| C. | before inspecting the sample as a whole. |
| D. | before selection and inspection of items one by one |
| Answer» C. before inspecting the sample as a whole. | |
| 99. |
Planning and controlling the quality of products and services is a ________ type ofdecision. |
| A. | control. |
| B. | operating. |
| C. | strategic. |
| D. | organisation. |
| Answer» B. operating. | |
| 100. |
The __________ approach considers only the immediate future. |
| A. | situationalistic approach. |
| B. | holistic approach. |
| C. | systems approach. |
| D. | tactical approach. |
| Answer» E. | |