24 + Mcqs in Phonocardiography Pcg Page 1 McqOptions

1.	What is the sampling rate of the analog-to-digital converter in digitizing of ECG signal in signal conditioning?
A.	250 Hz
B.	215 Hz
C.	40-100 Hz
D.	200-215 Hz
Answer» B. 215 Hz

Discussion

2.	Which is the final stage in arrhythmia analysis?
A.	Beat labeling
B.	Alarms
C.	Rhythm labeling
D.	Summary statistics
Answer» D. Summary statistics

Discussion

3.	When will be R-R interval declared premature?
A.	If it is greater than 85% of the predicted interval
B.	If it is less than 85% of the predicted interval
C.	If it is greater than 75% of the predicted interval
D.	If it is less than 75% of the predicted interval
Answer» C. If it is greater than 75% of the predicted interval

Discussion

4.	_________ is based on analyzing the shape of the QRS complexes and separating beats into groups or clusters.
A.	Timing classification
B.	Morphology characterization
C.	Beat labeling
D.	Noise detection
Answer» C. Beat labeling

Discussion

5.	How many steps are there in QRS detection?
A.	Three steps
B.	Two steps
C.	Four steps
D.	One step
Answer» C. Four steps

Discussion

6.	In the process of the ECG waveform, the detection filter removes _______ and _______
A.	Baseline wander, motion noise
B.	Muscle artifact, motion noise
C.	Low frequency noise, motion noise
D.	Baseline wander, muscle artifact
Answer» D. Baseline wander, muscle artifact

Discussion

7.	By using a _________ rather than a _________ the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.
A.	High-pass filter, Band-pass filter
B.	Low-pass filter, Band-pass filter
C.	Band-pass filter, Low-pass filter
D.	Band-pass filter, High-pass filter
Answer» D. Band-pass filter, High-pass filter

Discussion

8.	Which analog-to-digital converter is used in the digitization of ECG signal in signal conditioning?
A.	16 bit
B.	12 bit
C.	32 bit
D.	64 bit
Answer» C. 32 bit

Discussion

9.	In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________
A.	6/min to 10/min
B.	6/min to 12/min
C.	6/min or 10/min
D.	6/min or 12/min
Answer» E.

Discussion

10.	HOW_MANY_STEPS_ARE_THERE_IN_QRS_DETECTION??$
A.	Three steps
B.	Two steps
C.	Four steps
D.	One step
Answer» C. Four steps

Discussion

11.	When will be R-R interval declared premature?$
A.	If it is greater than 85% of the predicted interval
B.	If it is less than 85% of the predicted interval
C.	If it is greater than 75% of the predicted interval
D.	If it is less than 75% of the predicted interval
Answer» C. If it is greater than 75% of the predicted interval

Discussion

12.	__________is_based_on_analyzing_the_shape_of_the_QRS_complexes_and_separating_beats_into_groups_or_clusters.$
A.	Timing classification
B.	Morphology characterization
C.	Beat labeling
D.	Noise detection
Answer» C. Beat labeling

Discussion

13.	What is the sampling rate of analog-to-digital converter in digitizing of ECG signal in signal conditioning?
A.	250 Hz
B.	215 Hz
C.	40-100 Hz
D.	200-215 Hz
Answer» B. 215 Hz

Discussion

14.	Which techniques are used in a new algorithm proposed by Jen and Hwang to obtain the long term ECG signal feature and extract the meaningful information hiding in the QRS complex?
A.	Cepstrum time warping and Dynamic coefficient
B.	Cepstrum coefficient and Dynamic time warping
C.	QRS detection and Dynamic coefficient
D.	QRS detection and Cepstrum time warping
Answer» C. QRS detection and Dynamic coefficient

Discussion

15.	Ventricular Fibrillation is detected by _________
A.	Shape of the QRS complexes
B.	Difference of the R-R interval
C.	Timing sequence of QRS complexes
D.	Frequency domain analysis
Answer» E.

Discussion

16.	Which_is_the_final_stage_in_arrhythmia_analysis?
A.	Beat labeling
B.	Alarms
C.	Rhythm labeling
D.	Summary statistics
Answer» D. Summary statistics

Discussion

17.	In the process of the ECG waveform, the detection filter removes _______ and ______?
A.	Baseline wander, motion noise
B.	Muscle artifact, motion noise
C.	Low frequency noise, motion noise
D.	Baseline wander, muscle artifact
Answer» D. Baseline wander, muscle artifact

Discussion

18.	The steep, large amplitude variation of the QRS complex is the obvious characteristics to use and this is the function of the R wave detector.
A.	True
B.	False
Answer» B. False

Discussion

19.	By using a _________ rather than a _________, the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.
A.	High-pass filter, Band-pass filter
B.	Low-pass filter, Band-pass filter
C.	Band-pass filter, Low-pass filter
D.	Band-pass filter, High-pass filter
Answer» D. Band-pass filter, High-pass filter

Discussion

20.	Which analog-to-digital converter is used in digitization of ECG signal in signal conditioning?
A.	16 bit
B.	12 bit
C.	32 bit
D.	64 bit
Answer» C. 32 bit

Discussion

21.	In signal conditioning, ECG signal is amplified, filtered with 0.05-100 Hz for monitoring purposes and 1-40 Hz for diagnostic purposes.
A.	True
B.	False
Answer» C.

Discussion

22.	In automated arrhythmia monitoring system, which task is performed after the Ventricular fibrillation detection?
A.	Rhythm definition
B.	Beat labeling
C.	Atrial fibrillation detection
D.	Noise detection
Answer» B. Beat labeling

Discussion

23.	In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________
A.	6/min to 10/min
B.	6/min to 12/min
C.	6/min or 10/min
D.	6/min or 12/min
Answer» E.

Discussion

24.	An arrhythmia monitor is basically a ______
A.	Sophisticated monitoring system
B.	Sophisticated alarm system
C.	Patient monitoring system
D.	ECG interpretation system
Answer» C. Patient monitoring system

Discussion

Explore topic-wise MCQs in Biomedical Instrumentation.

What is the sampling rate of the analog-to-digital converter in digitizing of ECG signal in signal conditioning?

Which is the final stage in arrhythmia analysis?

When will be R-R interval declared premature?

_________ is based on analyzing the shape of the QRS complexes and separating beats into groups or clusters.

How many steps are there in QRS detection?

In the process of the ECG waveform, the detection filter removes _ and _

By using a _ rather than a _ the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.

Which analog-to-digital converter is used in the digitization of ECG signal in signal conditioning?

In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________

HOW_MANY_STEPS_ARE_THERE_IN_QRS_DETECTION??$

When will be R-R interval declared premature?$

__________is_based_on_analyzing_the_shape_of_the_QRS_complexes_and_separating_beats_into_groups_or_clusters.$

What is the sampling rate of analog-to-digital converter in digitizing of ECG signal in signal conditioning?

Which techniques are used in a new algorithm proposed by Jen and Hwang to obtain the long term ECG signal feature and extract the meaningful information hiding in the QRS complex?

Ventricular Fibrillation is detected by _________

Which_is_the_final_stage_in_arrhythmia_analysis?

In the process of the ECG waveform, the detection filter removes _ and ?

The steep, large amplitude variation of the QRS complex is the obvious characteristics to use and this is the function of the R wave detector.

By using a _ rather than a _, the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.

Which analog-to-digital converter is used in digitization of ECG signal in signal conditioning?

In signal conditioning, ECG signal is amplified, filtered with 0.05-100 Hz for monitoring purposes and 1-40 Hz for diagnostic purposes.

In automated arrhythmia monitoring system, which task is performed after the Ventricular fibrillation detection?

In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________

An arrhythmia monitor is basically a ______

Explore topic-wise MCQs in Biomedical Instrumentation.

What is the sampling rate of the analog-to-digital converter in digitizing of ECG signal in signal conditioning?

Which is the final stage in arrhythmia analysis?

When will be R-R interval declared premature?

_________ is based on analyzing the shape of the QRS complexes and separating beats into groups or clusters.

How many steps are there in QRS detection?

In the process of the ECG waveform, the detection filter removes _______ and _______

By using a _________ rather than a _________ the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.

Which analog-to-digital converter is used in the digitization of ECG signal in signal conditioning?

In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________

HOW_MANY_STEPS_ARE_THERE_IN_QRS_DETECTION??$

When will be R-R interval declared premature?$

__________is_based_on_analyzing_the_shape_of_the_QRS_complexes_and_separating_beats_into_groups_or_clusters.$

What is the sampling rate of analog-to-digital converter in digitizing of ECG signal in signal conditioning?

Which techniques are used in a new algorithm proposed by Jen and Hwang to obtain the long term ECG signal feature and extract the meaningful information hiding in the QRS complex?

Ventricular Fibrillation is detected by _________

Which_is_the_final_stage_in_arrhythmia_analysis?

In the process of the ECG waveform, the detection filter removes _______ and ______?

The steep, large amplitude variation of the QRS complex is the obvious characteristics to use and this is the function of the R wave detector.

By using a _________ rather than a _________, the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.

Which analog-to-digital converter is used in digitization of ECG signal in signal conditioning?

In signal conditioning, ECG signal is amplified, filtered with 0.05-100 Hz for monitoring purposes and 1-40 Hz for diagnostic purposes.

In automated arrhythmia monitoring system, which task is performed after the Ventricular fibrillation detection?

In arrhythmia monitoring system, it gives alarm light signals whenever the prematured or widened ectopic beats exist up to the rate of ___________

An arrhythmia monitor is basically a ______

In the process of the ECG waveform, the detection filter removes _ and _

By using a _ rather than a _ the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.

In the process of the ECG waveform, the detection filter removes _ and ?

By using a _ rather than a _, the amplitude of low frequency noise as well as the low frequency components of the ECG will be reduced without affecting the QRS.