MCQOPTIONS
Saved Bookmarks
This section includes 2114 Mcqs, each offering curated multiple-choice questions to sharpen your Unit Processes knowledge and support exam preparation. Choose a topic below to get started.
| 1351. |
CMRR of preamplifier upto 5 Khz should be _____________ |
| A. | 10 dB |
| B. | greater than 90 dB |
| C. | less than 90 dB |
| D. | 30 dB |
| Answer» C. less than 90 dB | |
| 1352. |
In a 2-d Plot, which command will make the axes of the graph same? |
| A. | axis square |
| B. | axis equals |
| C. | axes square |
| D. | axes equal |
| Answer» C. axes square | |
| 1353. |
The occipital lobe contains which of the following primary sensory areas? |
| A. | Visual |
| B. | Taste |
| C. | Auditory |
| D. | Olfactory |
| Answer» B. Taste | |
| 1354. |
The time period of a simple pendulum is 2 sec. If its length is increased by 4 times, then its period becomes |
| A. | 16 sec |
| B. | 8 sec |
| C. | 12 sec |
| D. | 4 sec |
| Answer» E. | |
| 1355. |
The process of examining stained chromosomes in a light microscope and removing appropriate regions with a micro-manipulator is called as: |
| A. | microdissection |
| B. | chromosome sorting |
| C. | chromosome walking |
| D. | chromosome jumping |
| Answer» B. chromosome sorting | |
| 1356. |
Loss of web capacity is given by ___ |
| A. | Z<sub>pw</sub> / (f<sub>y</sub> – f<sub>w</sub>) |
| B. | Z<sub>pw</sub> (f<sub>y</sub> – f<sub>w</sub>) |
| C. | Z<sub>pw</sub> (f<sub>y</sub> + f<sub>w</sub>) |
| D. | Z<sub>pw</sub> /(f<sub>y</sub> + f<sub>w</sub>) |
| Answer» C. Z<sub>pw</sub> (f<sub>y</sub> + f<sub>w</sub>) | |
| 1357. |
What is the ratio of number to weight distribution function for a bifunctional system? |
| A. | N<sub>0</sub>/n |
| B. | N<sub>0</sub> |
| C. | N |
| D. | n/ N<sub>0</sub> |
| Answer» B. N<sub>0</sub> | |
| 1358. |
What is the full form of AOX in Pichia pastoris expression system? |
| A. | Artificial oxidase |
| B. | Acetone oxidase |
| C. | Alcohol oxidase |
| D. | Acetyl oxidase |
| Answer» D. Acetyl oxidase | |
| 1359. |
In which of the following, both primary and secondary tanks are used? |
| A. | Two stage sludge digesters |
| B. | Single stage sludge digesters |
| C. | Low rate digesters |
| D. | High rate digesters |
| Answer» B. Single stage sludge digesters | |
| 1360. |
What happens if the field form is symmetrical about the pole axis? |
| A. | north and south pole of a machine are similar |
| B. | no harmonics |
| C. | no cosine terms |
| D. | north and south pole of a machine are similar, no harmonics, no cosine terms |
| Answer» E. | |
| 1361. |
Which of the following vectors are used for the production of transgenic mice? |
| A. | BAC |
| B. | Lambda phage |
| C. | YAC |
| D. | M13 phage |
| Answer» D. M13 phage | |
| 1362. |
Which one of the following is the major environmental issue? |
| A. | Use of resources |
| B. | Use of economy |
| C. | Education |
| D. | Employment |
| Answer» B. Use of economy | |
| 1363. |
What_is_the_temperature_at_which_a_change_from_anti-ferromagnetic_phase_to_paramagnetic_phase_occurs? |
| A. | Weiss |
| B. | Curie |
| C. | Neel |
| D. | Debye |
| Answer» C. Neel | |
| 1364. |
According_to_Aronhold_Kennedy’s_theorem,_if_three_bodies_move_relatively_to_each_other,_their_instantaneous_centres_will_lie_on_a$ |
| A. | straight line |
| B. | parabolic curve |
| C. | ellipse |
| D. | none of the mentioned |
| Answer» B. parabolic curve | |
| 1365. |
Stratification_is_defined_as____ |
| A. | Tendency for the points to cluster artificially around the center line |
| B. | Shift in the process level |
| C. | Continuous movement of points in one direction |
| D. | When the points fall near or slightly outside the control limits |
| Answer» B. Shift in the process level | |
| 1366. |
Castor_requires_a_mapping_configuration_file_to_know_how_to_map_objects_to_and_from_XML_documents. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 1367. |
The_value_of______is_relatively_high_for_short_columns. |
| A. | Safe load |
| B. | Factored load |
| C. | Working load |
| D. | Buckling load |
| Answer» E. | |
| 1368. |
A_brick_laid_on_the_long_narrow_side_with_the_broad_face_of_the_brick_exposed_is_known_as_______________ |
| A. | shiner |
| B. | header |
| C. | sailor |
| D. | soldier |
| Answer» C. sailor | |
| 1369. |
Which_bluetooth_version_enables_low_energy? |
| A. | Bluetooth 3.0 |
| B. | Bluetooth 4.0 |
| C. | Bluetooth 2.0 |
| D. | Bluetooth 1.0 |
| Answer» D. Bluetooth 1.0 | |
| 1370. |
By_using_a_______with_plastic_beads_of_varying_density,_nonfat_solids_in_milk_can_be_rapidly_estimated. |
| A. | Lactometer |
| B. | Hydrometer |
| C. | Humidoscope |
| D. | Polyscope |
| Answer» C. Humidoscope | |
| 1371. |
How_can_one_reduce_the_aliasing_effect_on_an_image? |
| A. | By reducing the high-frequency components of image by blurring the image |
| B. | By increasing the high-frequency components of image by blurring the image |
| C. | By reducing the high-frequency components of image by clarifying the image |
| D. | By increasing the high-frequency components of image by clarifying the image |
| Answer» B. By increasing the high-frequency components of image by blurring the image | |
| 1372. |
Sliding_vanes_in_pumps_are_held_by_________ |
| A. | Draft pins |
| B. | Whirl wheels |
| C. | Springs |
| D. | Nails |
| Answer» D. Nails | |
| 1373. |
___________________indicates_the_time_duration_by_which_we_comes_to_know_about_the_destructive_period_of_an_equipment. |
| A. | Depreciation |
| B. | Inadequacy |
| C. | Obsolescence |
| D. | Normal deterioration |
| Answer» E. | |
| 1374. |
Which_function_is_performed_by_counter_emf_of_a_DC_motor? |
| A. | Exceeds supply voltage |
| B. | Aids applied voltage |
| C. | Helps in energy conversion |
| D. | Regulates its armature voltage |
| Answer» D. Regulates its armature voltage | |
| 1375. |
Which of the following is the difference between the n-p-n and conventional bipolar transistor? |
| A. | Electric property |
| B. | Magnetic property |
| C. | Unconnected base |
| D. | Emitter base efficiency |
| Answer» D. Emitter base efficiency | |
| 1376. |
Which of the following type of restriction enzyme does not require ATP for cleavage? |
| A. | Type I |
| B. | Type II |
| C. | Type III |
| D. | Type IV |
| Answer» C. Type III | |
| 1377. |
When there is an open circuit what will be the net hole current? |
| A. | 5A |
| B. | 0.05A |
| C. | 0.5A |
| D. | 0A |
| Answer» E. | |
| 1378. |
Which of the following hormone is a modified amino acid? |
| A. | Progesterone |
| B. | Estrogen |
| C. | Prostaglandins |
| D. | Epinephrine |
| Answer» E. | |
| 1379. |
Modulus of rupture is calculated using the formula? |
| A. | f=PL/bd<sup>2</sup> |
| B. | f=PL<sup>3</sup>/3EI |
| C. | f=I/6bd<sup>2</sup> |
| D. | f=Pb/Ld<sup>2</sup> |
| Answer» B. f=PL<sup>3</sup>/3EI | |
| 1380. |
Which of the following is not a factor for explosive welding? |
| A. | High relative velocity |
| B. | Less amount of plastics |
| C. | Proper orientation |
| D. | High pressure |
| Answer» C. Proper orientation | |
| 1381. |
Choose the properties which are very important in case of LTI signals and systems? |
| A. | Linearity and time invariance |
| B. | Linearity and stability |
| C. | Stability and invariance |
| D. | Linearity and causality |
| Answer» B. Linearity and stability | |
| 1382. |
In a nominal-π method the resistance of line is assumed to be _________?# |
| A. | Distributed uniformly from sending end to receiving end |
| B. | Divided into two halves |
| C. | Lumped at the generation end |
| D. | Lumped at middle of the line |
| Answer» E. | |
| 1383. |
Beyond what dose is the cerebral system shows signs of failure? |
| A. | 25 – 200 rad |
| B. | 200 – 600 rad |
| C. | 600 – 1000 rad |
| D. | > 1000 rad |
| Answer» E. | |
| 1384. |
Double focussing section analysers offer better resolution than ICP spectrometry system? |
| A. | True |
| B. | False |
| Answer» B. False | |
| 1385. |
Which of the following is the property of adsorbtion isotherm? |
| A. | Linear |
| B. | Decreasing |
| C. | Monotonous |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 1386. |
What is the full form of ESL in Online Test? |
| A. | EEPROM system level |
| B. | Electronic-system level |
| C. | Electrical system level |
| D. | Electron system level |
| Answer» C. Electrical system level | |
| 1387. |
______ of the runs will have a length of ? |
| A. | one third |
| B. | one fourth |
| C. | half |
| D. | one eight |
| Answer» D. one eight | |
| 1388. |
The amines of the high-molecular-weight fatty alcohols are best prepared in ________ condition? |
| A. | Pressure system |
| B. | Temperature system |
| C. | Enthalpy system |
| D. | All of the mentioned |
| Answer» B. Temperature system | |
| 1389. |
Linear lumped parameter models are not valid under situations as? |
| A. | Transmission pipe between the hydraulic pump and the motor causes a time lag in transportation of oil from pump to motor |
| B. | Transmission of heat by conduction or convection produces serious transportation lag |
| C. | Both of the mentioned |
| D. | None of the mentioned |
| Answer» D. None of the mentioned | |
| 1390. |
_____________ is the technique of analysis of the measured data for evaluating errors and deviations? |
| A. | Frequency response |
| B. | Static analysis |
| C. | First order response |
| D. | None of the mentioned |
| Answer» C. First order response | |
| 1391. |
Hot-spot temperature is dependent on ___________? |
| A. | 4 categories |
| B. | 6 categories |
| C. | 8 categories |
| D. | 10 categories |
| Answer» B. 6 categories | |
| 1392. |
The aim of the designer should always be to get concrete mixtures of optimum strength at __ cement content and ________ workability? |
| A. | Maximum, Nonacceptable |
| B. | Minimum, Nonacceptable |
| C. | Maximum, acceptable |
| D. | Minimum, acceptable |
| Answer» E. | |
| 1393. |
Which of the following is not a valid representative factor? |
| A. | 1:2 |
| B. | 1:3 |
| C. | 2:5 |
| D. | 0:4 |
| Answer» E. | |
| 1394. |
The depth of rutting criterion is obtained b? |
| A. | Micro strain |
| B. | Macro strain |
| C. | Traffic |
| D. | Elasticity modulus |
| Answer» B. Macro strain | |
| 1395. |
Which of the following from the options is included in the system to facilitate playback and study of EMG sound waveforms at a later convenient time? |
| A. | Tape Recorder |
| B. | Preamplifier |
| C. | Oscilloscope |
| D. | Ground Electrode |
| Answer» B. Preamplifier | |
| 1396. |
The end product resulting from solidification process is __? |
| A. | Liquid waste |
| B. | Silt |
| C. | Waste block |
| D. | Organics |
| Answer» D. Organics | |
| 1397. |
Upper and lower boundaries of the “desired” values of y are plotted as lines. These are the _________ and _________ The average value (X, said as “X-bar”) is centred b/w the control limits. The range of the control limits, R, depends on the statistical variation of the process?# |
| A. | Higher limit and lower limit |
| B. | Upper control limit and lower control limit |
| C. | Max. limit and Min. Limit |
| D. | Upper point and lower point |
| Answer» C. Max. limit and Min. Limit | |
| 1398. |
What is the sphericity of anthracite coal particles? |
| A. | 0.67 |
| B. | 0.86 |
| C. | 0.63 |
| D. | 0.58 |
| Answer» D. 0.58 | |
| 1399. |
How many dies are used in reciprocating flat die machines? |
| A. | 2 |
| B. | 3 |
| C. | 4 |
| D. | 5 |
| Answer» B. 3 | |
| 1400. |
If L is a regular language, then (L’)’ U L will be ?# |
| A. | L |
| B. | L’ |
| C. | f |
| D. | none of the mentioned |
| Answer» B. L‚Äö√Ñ√∂‚àö√ë‚àö¬• | |