MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 14 Mcqs, each offering curated multiple-choice questions to sharpen your Corrosion Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 1. |
Which of the following is/are the p-type semiconducting oxides? |
| A. | FeO and MnO |
| B. | FeO, MnO, Cu2O, and CoO |
| C. | Al2O3, MnO, and CoO |
| D. | CdO2, Cu2O, and Mno |
| Answer» C. Al2O3, MnO, and CoO | |
| 2. |
Which of the following is/are the n-type semiconducting oxides? |
| A. | CdO2 |
| B. | TiO2 |
| C. | Al2O3, CdO2, and TiO2 |
| D. | CoO |
| Answer» D. CoO | |
| 3. |
Which of the following metal(s) produces metal oxide at a metal-scale interface? |
| A. | Titanium |
| B. | Niobium |
| C. | Zirconium |
| D. | Titanium, Niobium, and Zirconium |
| Answer» E. | |
| 4. |
The relative thickness of each phase of a metallic oxide is determined by the rate of ionic diffusion through that phase. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 5. |
Which of the following order is correct regarding the oxides of iron starting from metallic iron to gaseous oxygen interface? |
| A. | FeO, Fe2O3, and Fe3O4 |
| B. | Fe2O3, Fe3O4 and FeO |
| C. | Fe3O4, Fe2O3, and FeO |
| D. | FeO, Fe3O4, and Fe2O3 |
| Answer» E. | |
| 6. |
The diffusion of either cation or oxygen ions usually controls the reaction rate of high-temperature metallic oxidation. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 7. |
Which of the following is/are the interface at which new metallic oxides (MO) are produced? |
| A. | Metal-scale interface |
| B. | Scale-gas interface |
| C. | Metal-scale interface or scale-gas interface |
| D. | Neither metal-scale interface nor scale-gas interface |
| Answer» D. Neither metal-scale interface nor scale-gas interface | |
| 8. |
What is the value of the Pilling and Bed worth ratio of tungsten? |
| A. | 1.21 |
| B. | 3.40 |
| C. | 2.60 |
| D. | 0.45 |
| Answer» C. 2.60 | |
| 9. |
Which of the following metal has a nonprotective oxide? |
| A. | Cadmium (CdO2) |
| B. | Copper (Cu2O) |
| C. | Chromium (Cr2O3) |
| D. | Silicon (SiO2) |
| Answer» B. Copper (Cu2O) | |
| 10. |
Which of the following is/are the ideal characteristics of the passive metal oxide layer? |
| A. | Good adherence and high melting point |
| B. | Low electrical conductivity and low vapor pressure |
| C. | Good adherence, high melting point, low vapor pressure, and low electrical conductivity |
| D. | Good adherence and high vapor pressure |
| Answer» D. Good adherence and high vapor pressure | |
| 11. |
Which of the following is/are the causes for the poor oxidation resistance of metal oxide with high Pilling and Bed worth ratio? |
| A. | Large compressive stresses in the oxide |
| B. | Cracking |
| C. | Spalling |
| D. | Large compressive stresses in the oxide, cracking and spalling |
| Answer» E. | |
| 12. |
Which of the following is/are the characteristics of a metal oxide if the Pilling and Bed worth ratio is less than 1? |
| A. | Protective |
| B. | Unprotective |
| C. | Unprotective and insufficient oxide |
| D. | Unprotective and sufficient oxide |
| Answer» D. Unprotective and sufficient oxide | |
| 13. |
Pilling and Bed worth proposed that oxidation resistance is related to the volume ratio of oxide and metal per grams atom of metal. |
| A. | True |
| B. | False |
| Answer» B. False | |
| 14. |
Which of the following is/are the systems that are prone to high-temperature corrosion? |
| A. | Gas turbines |
| B. | Rocket engines |
| C. | Furnaces |
| D. | Gas turbines, rocket engines, and furnaces |
| Answer» E. | |