27 + Mcqs in Destructive Testing Page 1 McqOptions

1.	Evaluation of cracks _________ be determined after cracking.
A.	Can
B.	Can’t
C.	Sometimes
D.	Depends on the structure
Answer» B. Can’t

Discussion

2.	In Concrete core test the strength is ________ at the top and _________ at the bottom.
A.	Lowest, lowest
B.	Lowest, highest
C.	Highest, lowest
D.	Highest, highest
Answer» C. Highest, lowest

Discussion

3.	A ratio of core height-to-diameter of __________ gives a standard cylinder test.
A.	1
B.	2
C.	3
D.	4
Answer» C. 3

Discussion

4.	It is about __________ times the tensile stress determined by the splitting test.
A.	Equal
B.	.5
C.	1.5
D.	2
Answer» D. 2

Discussion

5.	The fatigue performance of metallic casting is generally determined by endurance limit of the material.
A.	True
B.	False
Answer» B. False

Discussion

6.	In impact testing of materials, the notches are made to reduce the stress concentration.
A.	True
B.	False
Answer» C.

Discussion

7.	The dynamic tear test is mainly used for evaluating fracture properties of ultrahigh strength steel castings.
A.	True
B.	False
Answer» B. False

Discussion

8.	Charpy v-notch test can only estimate the energy absorbed by the fracturing of material.
A.	True
B.	False
Answer» C.

Discussion

9.	Which of the following tests uses a heavy pendulum for the breaking of a specimen while inspection?
A.	Pressure test
B.	Static tear test
C.	Stress test
D.	Charpy v-notch test
Answer» E.

Discussion

10.	Destructive tests are generally much easier to interpret than the non-destructive tests.
A.	True
B.	False
Answer» B. False

Discussion

11.	THE_DYNAMIC_TEAR_TEST_IS_MAINLY_USED_FOR_EVALUATING_FRACTURE_PROPERTIES_OF_ULTRAHIGH_STRENGTH_STEEL_CASTINGS.?$
A.	True
B.	False
Answer» B. False

Discussion

12.	DURING_RADIOGRAPHY_TEST,_WHICH_REGION_ABSORBS_LESS_RADIATION_AND_TRANSMITS_MORE??$
A.	Low and high density regions absorb and transmit same amount of radiation
B.	High density region
C.	Low density region
D.	Low and high density regions adsorb
Answer» D. Low and high density regions adsorb

Discussion

13.	The fatigue performance of metallic casting is generally determined by endurance limit of the material.$
A.	True
B.	False
Answer» B. False

Discussion

14.	In impact testing of materials, the notches are made to reduce the stress concentration.$
A.	True
B.	False
Answer» C.

Discussion

15.	Which of the following parameters is also known as stress intensity factor (K)?
A.	Creep
B.	Proof resilience
C.	Fracture toughness
D.	Endurance
Answer» D. Endurance

Discussion

16.	Charpy v-notch test can only estimate the energy absorbed by the fracturing of material?
A.	True
B.	False
Answer» C.

Discussion

17.	Which of the following tests uses a heavy pendulum for the breaking of specimen while inspection?
A.	Pressure test
B.	Static tear test
C.	Stress test
D.	Charpy v-notch test
Answer» E.

Discussion

18.	In Concrete core test the strength is __ at the top and ___ at the bottom.
A.	Lowest, lowest
B.	Lowest, highest
C.	Highest, lowest
D.	Highest, highest
Answer» C. Highest, lowest

Discussion

19.	Which of the following tests is not the type of destructive testing of materials?
A.	Stress test
B.	Crash test
C.	Hardness test
D.	Pressure test
Answer» E.

Discussion

20.	A ratio of core height-to-diameter of ___ gives a standard cylinder test.
A.	1
B.	2
C.	3
D.	4
Answer» C. 3

Discussion

21.	Destructive testing method can also be economical for large casting or structure.
A.	True
B.	False
Answer» C.

Discussion

22.	It is about ___ times the tensile stress determined by the splitting test.
A.	Equal
B.	.5
C.	1.5
D.	2
Answer» D. 2

Discussion

23.	High speed camera used in destructive testing can give very precise information about the failure of casting or material.
A.	True
B.	False
Answer» B. False

Discussion

24.	Compressive strength of hardened concrete is done by _________
A.	Cube test
B.	Tensile splitting test
C.	Concrete core test
D.	Flexure test
Answer» B. Tensile splitting test

Discussion

25.	In destructive testing, all the operations are performed manually, thus it does not require any technologies or electronic devices.
A.	True
B.	False
Answer» C.

Discussion

26.	Destructive testing is not economical for mass production as this method destroys material for the inspection.
A.	True
B.	False
Answer» C.

Discussion

27.	What is destructive test?
A.	Destructive tests are applications for detecting flaws in materials without impairing their usefulness
B.	Destructive tests are applications for detecting flaws that impair the use of the materials such as pressure testing
C.	Destructive tests are applications for detecting flaws in materials with impairing their usefulness
D.	Destructive tests are applications for detecting flaws that do not impair the use of the materials such as pressure testing
Answer» C. Destructive tests are applications for detecting flaws in materials with impairing their usefulness

Discussion

Explore topic-wise MCQs in Concrete Technology.

Evaluation of cracks _________ be determined after cracking.

In Concrete core test the strength is at the top and _ at the bottom.

A ratio of core height-to-diameter of __________ gives a standard cylinder test.

It is about __________ times the tensile stress determined by the splitting test.

The fatigue performance of metallic casting is generally determined by endurance limit of the material.

In impact testing of materials, the notches are made to reduce the stress concentration.

The dynamic tear test is mainly used for evaluating fracture properties of ultrahigh strength steel castings.

Charpy v-notch test can only estimate the energy absorbed by the fracturing of material.

Which of the following tests uses a heavy pendulum for the breaking of a specimen while inspection?

Destructive tests are generally much easier to interpret than the non-destructive tests.

THE_DYNAMIC_TEAR_TEST_IS_MAINLY_USED_FOR_EVALUATING_FRACTURE_PROPERTIES_OF_ULTRAHIGH_STRENGTH_STEEL_CASTINGS.?$

DURING_RADIOGRAPHY_TEST,_WHICH_REGION_ABSORBS_LESS_RADIATION_AND_TRANSMITS_MORE??$

The fatigue performance of metallic casting is generally determined by endurance limit of the material.$

In impact testing of materials, the notches are made to reduce the stress concentration.$

Which of the following parameters is also known as stress intensity factor (K)?

Charpy v-notch test can only estimate the energy absorbed by the fracturing of material?

Which of the following tests uses a heavy pendulum for the breaking of specimen while inspection?

In Concrete core test the strength is at the top and _ at the bottom.

Which of the following tests is not the type of destructive testing of materials?

A ratio of core height-to-diameter of ___ gives a standard cylinder test.

Destructive testing method can also be economical for large casting or structure.

It is about ___ times the tensile stress determined by the splitting test.

High speed camera used in destructive testing can give very precise information about the failure of casting or material.

Compressive strength of hardened concrete is done by _________

In destructive testing, all the operations are performed manually, thus it does not require any technologies or electronic devices.

Destructive testing is not economical for mass production as this method destroys material for the inspection.

What is destructive test?

Explore topic-wise MCQs in Concrete Technology.

Evaluation of cracks _________ be determined after cracking.

In Concrete core test the strength is ________ at the top and _________ at the bottom.

A ratio of core height-to-diameter of __________ gives a standard cylinder test.

It is about __________ times the tensile stress determined by the splitting test.

The fatigue performance of metallic casting is generally determined by endurance limit of the material.

In impact testing of materials, the notches are made to reduce the stress concentration.

The dynamic tear test is mainly used for evaluating fracture properties of ultrahigh strength steel castings.

Charpy v-notch test can only estimate the energy absorbed by the fracturing of material.

Which of the following tests uses a heavy pendulum for the breaking of a specimen while inspection?

Destructive tests are generally much easier to interpret than the non-destructive tests.

THE_DYNAMIC_TEAR_TEST_IS_MAINLY_USED_FOR_EVALUATING_FRACTURE_PROPERTIES_OF_ULTRAHIGH_STRENGTH_STEEL_CASTINGS.?$

DURING_RADIOGRAPHY_TEST,_WHICH_REGION_ABSORBS_LESS_RADIATION_AND_TRANSMITS_MORE??$

The fatigue performance of metallic casting is generally determined by endurance limit of the material.$

In impact testing of materials, the notches are made to reduce the stress concentration.$

Which of the following parameters is also known as stress intensity factor (K)?

Charpy v-notch test can only estimate the energy absorbed by the fracturing of material?

Which of the following tests uses a heavy pendulum for the breaking of specimen while inspection?

In Concrete core test the strength is __ at the top and ___ at the bottom.

Which of the following tests is not the type of destructive testing of materials?

A ratio of core height-to-diameter of ___ gives a standard cylinder test.

Destructive testing method can also be economical for large casting or structure.

It is about ___ times the tensile stress determined by the splitting test.

High speed camera used in destructive testing can give very precise information about the failure of casting or material.

Compressive strength of hardened concrete is done by _________

In destructive testing, all the operations are performed manually, thus it does not require any technologies or electronic devices.

Destructive testing is not economical for mass production as this method destroys material for the inspection.

What is destructive test?

In Concrete core test the strength is at the top and _ at the bottom.

In Concrete core test the strength is at the top and _ at the bottom.