Explore topic-wise MCQs in Technical Programming.

This section includes 1088 Mcqs, each offering curated multiple-choice questions to sharpen your Technical Programming knowledge and support exam preparation. Choose a topic below to get started.

501.

The working principles of today's computers were provided by an English mathematician

A. Charles Babbage
B. Dr. Hollerith
C. Donald Reach
D. Ken Reider
Answer» B. Dr. Hollerith
502.

The term "memory" applies to which one of the following

A. Logic
B. Storage
C. Control
D. Input device
Answer» C. Control
503.

What was the name of the first commercially available micro¬processor chip?

A. Intel 8008
B. Intel 8080
C. Intel 4004
D. Motorola 6809
Answer» D. Motorola 6809
504.

A dot-matrix printer

A. is an input device
B. is an output device
C. cannot print alphabet
D. has a speed of 1000 cps
Answer» C. cannot print alphabet
505.

Methods used to organise and physically store disk data are cylinder and

A. Sector
B. Surface
C. Track
D. Hib
Answer» B. Surface
506.

A software package to implement a data base is

A. System analysis
B. DBMS
C. Database
D. DASD
Answer» C. Database
507.

The primary memory of a personal computer consists of:

A. ROM only
B. RAM only
C. Both ROM and RAM
D. Memory module
Answer» D. Memory module
508.

The term MIPS refers to _____

A. millions of instructions per second
B. multiple instructions per second
C. megabytes of instructions per seconds
D. millions input processor set
Answer» B. multiple instructions per second
509.

Which of the following printers, are you sure will not to use if your objective is to print on multicarbon forms?

A. daisy wheel
B. dot-matrix
C. laser
D. thimble
Answer» D. thimble
510.

A database management system based on the concept of ownership is

A. Network topology
B. Network layer
C. Network database system
D. Network license system
Answer» D. Network license system
511.

A type of simulation method using random numbers to determine the evolution of a system is

A. Model dispersion
B. Monte carlo
C. Monadic
D. Padding
Answer» C. Monadic
512.

A printer in which the characters are embossed on a band is

A. Dot-matrix
B. Laser
C. Golf-ball
D. Chain
Answer» E.
513.

Which type of processing that produces output results immediately after input data are entered into a computer system

A. Time-sharing
B. Interactive
C. Batch processing
D. Real-time processing
Answer» C. Batch processing
514.

A device used to measure the circuit density of a chip is

A. Light pen
B. Mouse
C. LSI
D. All of the above
Answer» D. All of the above
515.

What is the acronym for Single In-Line Memory Module?

A. SIMM
B. SILMM
C. SM
D. SMM
Answer» B. SILMM
516.

Which was the world's first minicomputer and when was it introduced?

A. PDP-1, 1958
B. 1MB System/36, 1960
C. PDP-11 1961
D. VAX 11/780, 1962
Answer» B. 1MB System/36, 1960
517.

A hard copy would be prepared on a

A. Line printer
B. Dot matrix printer
C. Type writer terminal
D. All of the above
Answer» E.
518.

A computer program that instructs other programs to perform a particular type of operation is

A. System software
B. Application program
C. Compiler
D. Interpreter
Answer» B. Application program
519.

Tiny rings made of magnetic material that can be polarised to represent binary 1 or 0 is called

A. Magnetic core
B. Magnetic disk
C. Card punch
D. Floppy disk
Answer» B. Magnetic disk
520.

A hand-held device which reads marks or characters on paper by detecting photo-sensitivity is known as

A. Light pen
B. Optical-wand
C. Plotter
D. All of the above
Answer» C. Plotter
521.

One of a class of storage devices that can access storage locations in any order is

A. DTE
B. DASD
C. DDE
D. DDC
Answer» C. DDE
522.

Which of the following time will normally be determined by the requirements of the device to which the transfer is being made

A. Access
B. Cycle
C. Hold
D. Delay
Answer» D. Delay
523.

The magnetic disks and drums are like recirculating shift registers because

A. they have about the same storage capacity
B. their storage is non volatile
C. their access times are about the same
D. stored data is available for reading over and over again in the same order.
Answer» E.
524.

Which of the following programs give instructions about operations inside the computer

A. System software
B. Application
C. Utility id) Compiler
D. None of the above
Answer» B. Application
525.

The _____ provides a path between the CPU and peripheral devices, which are connected via interface cards.

A. computer
B. expansion bus
C. memory
D. CPU
Answer» C. memory
526.

A terminal having local processing capability is

A. KIPS
B. AI
C. Intelligent terminal
D. Optical terminal
Answer» D. Optical terminal
527.

The process used to set up a programs once the system is operational is

A. Operating system
B. Black bon
C. Boot strap
D. Utility
Answer» D. Utility
528.

Which device uses much less computer time than the light pen and gives resolutions equal to that of the CRT display.

A. Mouse
B. Touch tablet
C. Touch panel
D. Data tablet
Answer» E.
529.

The first IBM PC did not have any

A. disk drive
B. RAM
C. ROM
D. Port
Answer» B. RAM
530.

Which memory stores the values of variables.

A. sam
B. ram
C. rom
D. prom
Answer» C. rom
531.

One million bytes of information is abbreviated as

A. Bit
B. MB
C. KB
D. GB
Answer» C. KB
532.

The earliest device that qualifies as a digital computer is

A. EDSAC
B. Abacus
C. ENIAC
D. EDVAC
Answer» C. ENIAC
533.

A monitor looks like a TV set but it does not

A. Receive TV signals
B. Give a clear picture
C. Give a steady picture
D. Display graphics
Answer» B. Give a clear picture
534.

Pictures or drawings, typically displayed on a VDU to allow users to select program options is called

A. HIPO charts
B. Icons
C. Graphics
D. Network
Answer» C. Graphics
535.

An input device that uses switch contacts placed under a plastic pad which may be inscribed with symbols is known as

A. Punched card
B. Touch pad
C. Punched paper tape
D. Magnetic disk
Answer» C. Punched paper tape
536.

Programs prepared by an outside supplier & privided to a user in a machine readable form is known as

A. Utility program
B. Canned program
C. Application program
D. Application software
Answer» C. Application program
537.

Conversion of a hexadecimal number 3D16 to binary number is

A. 1111012
B. 1100112
C. 110001102
D. 1100012
Answer» B. 1100112
538.

The smallest logical data entity is called a data item or data

A. Base
B. Field
C. Bank
D. Collection
Answer» C. Bank
539.

A memory that is capable of determining whether a given datum is contained in one of its addresses is

A. ROM
B. PROM
C. CAM
D. RAM
Answer» D. RAM
540.

Which of the following machines are characterised by electronic tube circuitry, delay line, rotating or electrostatic memory.

A. First generation
B. Fifth generation
C. Third generation
D. Second generation
Answer» B. Fifth generation
541.

Which of the following is true concerning personal computers?

A. They decrease the demand for mainframe computers
B. They have been most successful in the home
C. The electronic spreadsheet has been a primary reason for their popularity
D. Their future is not so bright owning to the improved cost-performance ratio of minis and mainframes
Answer» D. Their future is not so bright owning to the improved cost-performance ratio of minis and mainframes
542.

The disadvantage of dynamic RAM over static RAM is

A. higher power consumption
B. variable speed
C. need to refresh the capacitor charge every once in two milliseconds
D. higher bit density
Answer» D. higher bit density
543.

A repository for data, usually covering specific topic is

A. Database
B. Data requisition
C. Databank
D. Data collection
Answer» D. Data collection
544.

Which of the following is also known as SOROBAN

A. ENIAC
B. Abacus
C. EDSAC
D. UNIVAC
Answer» C. EDSAC
545.

Programmed instructions to the computer is known as

A. Data
B. Code
C. Documentation
D. Database
Answer» C. Documentation
546.

The first mechanical calculator was invented in

A. 1958
B. 1647
C. 1658
D. 1972
Answer» C. 1658
547.

Which is the first compiler-level language developed by a team of IBM programmers led by John Backus and unveiled in 1957?

A. BASIC
B. PL/1
C. FORTRAN
D. APL
Answer» D. APL
548.

Magnetic tape can serve as

A. Input media
B. Output media
C. Secondary storage media
D. All of the above
Answer» E.
549.

Number cruncher is the informal name for

A. Mini computer
B. Super computer
C. Micro computer
D. Mainframe computer
Answer» C. Micro computer
550.

What type of memory is not directly addressable by the CPU and requires special software called EMS (expanded memory specification)?

A. Extended
B. Expanded
C. Base
D. Conventional
Answer» C. Base