MCQOPTIONS
Saved Bookmarks
MCQOPTIONS
This section includes 365 Mcqs, each offering curated multiple-choice questions to sharpen your Automobile Engineering knowledge and support exam preparation. Choose a topic below to get started.
| 351. |
The main function of intake manifold is that it |
| A. | promotes the mixture of air and fuel |
| B. | reduces intake noise |
| C. | cools the intake air to a suitable temperature |
| D. | distributes intake air equally to the cylinders |
| Answer» E. | |
| 352. |
The flywheel and the pressure plate bind the clutch disc between them so that the engine and the transmission can be engaged. |
| A. | Yes |
| B. | No |
| C. | - |
| D. | - |
| Answer» B. No | |
| 353. |
In a spark plug, when the temperature of the central electrode exceeds a certain temperature, any carbon that has adhered will be burnt off, and the temperature at which this burning off carbon starts is referred to as the self cleaning temperature. |
| A. | Correct |
| B. | Incorrect |
| C. | - |
| D. | - |
| Answer» B. Incorrect | |
| 354. |
In radial tyres |
| A. | one ply layer runs diagonally one way and another layer runs diagonally the other way |
| B. | all plies run parallel to one another and vertical to tyre bead |
| C. | inner tubes are always used |
| D. | none of these |
| Answer» C. inner tubes are always used | |
| 355. |
The torque available at the contact between driving wheels and road is known as |
| A. | brake effort |
| B. | tractive effort |
| C. | clutch effort |
| D. | none of these |
| Answer» C. clutch effort | |
| 356. |
In a unit type body (frameless body) design, the sheet metal parts are welded together, forming a frame work to which outer skin is attached. |
| A. | True |
| B. | False |
| C. | - |
| D. | - |
| Answer» B. False | |
| 357. |
Incorrect steering axis inclination (S.A.I.) causes |
| A. | tendency to assume toe-out orientation |
| B. | generation of a braking effect at tight corners |
| C. | poor recovery of the steering wheel after making a turn |
| D. | the vehicle to pull to the side of lesser inclination |
| Answer» D. the vehicle to pull to the side of lesser inclination | |
| 358. |
It is necessary to maintain the valve clearances as they |
| A. | reduce the resistance to sliding that occurs between the cam and the tappet |
| B. | allow for lengthening of the valves owing to the heat of combustion |
| C. | increase the speed at which the valves move up and down |
| D. | make the crankshaft turn smoothly |
| Answer» C. increase the speed at which the valves move up and down | |
| 359. |
What type of bearing is used for main bearings and connecting rod bearings ? |
| A. | Ballbearings |
| B. | Plain bearings |
| C. | Needle roller bearing |
| D. | Taper roller bearing |
| Answer» C. Needle roller bearing | |
| 360. |
A clutch is usually designed to transmit maximum torque which is |
| A. | equal to the maximum engine torque |
| B. | 80 per cent of the maximum engine torque |
| C. | 150 per cent of the maximum engine torque |
| D. | none of these |
| Answer» D. none of these | |
| 361. |
Which of the following symptom is caused as a result of brake disc run out ? |
| A. | Ineffectiveness of the brakes |
| B. | Judder during braking |
| C. | Localized wearing of the brake pads |
| D. | Rapid wearing of the brake pads |
| Answer» C. Localized wearing of the brake pads | |
| 362. |
The motion of the cam is transferred to the valves through |
| A. | pistons |
| B. | rocker arms |
| C. | camshaft pulley |
| D. | valve stems |
| Answer» C. camshaft pulley | |
| 363. |
A baffle plate is fitted inside the oil pan to prevent the oil from splashing when it is subjected to vibration and other movement during vehicle operation. |
| A. | True |
| B. | False |
| C. | - |
| D. | - |
| Answer» B. False | |
| 364. |
The portion of a crankshaft which rests on cylinder block is called main journal. |
| A. | Yes |
| B. | No |
| C. | - |
| D. | - |
| Answer» B. No | |
| 365. |
The condition that causes vapour locking in a brake system is |
| A. | overheating of the fluid due to frequent brake application |
| B. | overcooling of the brakes during high speed driving |
| C. | keeping the vehicle without use for an extended period |
| D. | an excessively high engine speed on a downhill road |
| Answer» B. overcooling of the brakes during high speed driving | |