The__________ condenser is generally used for low-pressure applicatio – McqOptions

MCQOPTIONS

1.	The__________ condenser is generally used for low-pressure applications, where there is a large volume of vapour flow and a low-pressure drop is desired.
A.	Co-current Flow
B.	Counter flow
C.	Cross-flow
D.	Mixed flow
Answer» D. Mixed flow

Discussion

No Comment Found

Related MCQs

The reflux condenser must be designed such that vapour velocity is ________ the flooding velocity.
A condenser has coolant in counter-current flow with the vapour flowing upward and itself flowing downward, then it is commonly known as the _______________
__________ condensers are preferred if the condensing fluid is at a higher pressure than the coolant.
Tube-side condenser is preferred when the coolant is a gas, such as air.
Condensation on the ____________ is preferred when the coolant is a gas.
A possible configuration for low pressure drop is the ______________
The size of the baffle cut is generally chosen such that the vapour velocity in the tube is _________ that in the overlap area between the baffle discs.
_______________ can reduce resistance to heat transfer through the shear effect on the condensate film.
The space between the baffles is not determined by considerations such as _____________
_______________ baffles may be specified to achieve reduced pressure drop.