Switch angle depends on(i) Heel divergence(ii) Length of tongue rail(i – McqOptions

MCQOPTIONS

1.	Switch angle depends on(i) Heel divergence(ii) Length of tongue rail(iii) Flange-way clearance(iv) Throw of switchThe correct answer is
A.	(i) and (ii)
B.	(ii) and (iii)
C.	(iii) and (iv)
D.	(i) and (iv)
Answer» B. (ii) and (iii)

Discussion

No Comment Found

Related MCQs

On a Single Rail Track,goods trains loadedwith heavy load material run starting from A to B and then empty wagon run from B to A .The amount of creep in the rails:
Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
The spread between the point and splice rails at a distance of 4.25 m is 50 cm. The size of the crossing is
Consider the following surveys.1. Reconnaissance survey2. Preliminary survey3. Traffic survey4. Location surveyThe correct sequence in which these surveys are conducted before the alignment of a track is finalised is
Consider the following statements:Automatic signalling system results in1. Greater risk2. Higher efficiency3. Avoidance of block instruments4. Higher operating costOf these statements
The formation width for a double line Broad Gauge track in cutting (excluding drains) as adopted on Indian Railways is
Minimum depth of ballast cushion for a Broad Gauge wooden sleeper of size 275 25 13 cm with 75 cm sleeper spacing is
If L1 and L2 are actual and theoretical lengths of a tongue rail, d is heel divergence and t is thickness
On Indian Railways, angle of crossing between gauge faces of Vee, is generally calculated by
Which of the following factors govern the choice of the gauge?(i) Volume and nature of traffic(ii) Speed of train(iii) Physical features of the countryThe correct answer is