None of the poles of a linear control system lie in the right half of s-plane. For a bounded input, the output of this system

None of the poles of a linear control system lie in the right half of

1.	None of the poles of a linear control system lie in the right half of s-plane. For a bounded input, the output of this system
A.	is always bounded
B.	could be unbounded
C.	always tends to zero
D.	none of these
Answer» C. always tends to zero

Discussion

No Comment Found

Related MCQs

For the transfer functionG(s) = 5(s + 4) s (s + 0.25)(s2 + 4s + 25)The values of the constant gain term and the highest corner frequency of t he Bode plot respectively are
The maximum phase shift that can be provided by a lead compensator with transfer functionG(s) = 1 + 6s is1 + 2s
A linear second-order single-input continuous-time system is described by the following set of differential equations : X1 (t) = 2 X1 (t) + 4 X2 (t) X2 (t) = 2 X1 (t) X2 (t) + u (t) where X1 (t) and X2 (t) are the state variables and u (t) is the control variable. The system is
A system with the open loop transfer function G(s) = K s(s + 2)(s2 + 2s + 2)is connected in a negative feedback configuration with a feedback gain of unity. For the closed loop system to be marginally stable, the value of K is ____
The closed-loop transfer function of a system is T(s) = 4 (s2 + 0.4s + 4)The steady state error due to unit step input is ____.
An open loop control system results in a response of e 2t (sin5t + cos5t) for a unit impulse input. The DC gain of the control system is ______.
For the transfer functionG(s) H(s) = 1 s (s + 1)(s + 0.5)the phase cross-over frequency is_____ rad/sec
The value of k for a unity feedback system with G(s) = k s(1 + s)to have a peak overshoot of 50% is _______
The z-transform of a signal is given by c(z) = z 1 (1 - z 4)4(1 - z 1)2Its final value is_______ .
A unity-feedback control system has the open-loop transfer functionG(s) = 4(1 + 2s) s2 (s + 2)If input to the system is a unit ramp, then steadystate error will be_______

None of the poles of a linear control system lie in the right half of s-plane. For a bounded input, the output of this system

Discussion

No Comment Found

Related MCQs

Reply to Comment