If the shear stress in a R.C.C. beam is – McqOptions

MCQOPTIONS

1.	If the shear stress in a R.C.C. beam is
A.	equal or less than 5 kg/cm2, no shear reinforcement is provided
B.	greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided
C.	greater than 20 kg/cm2, the size of the section is changed
D.	all the above.
Answer» E.

Discussion

No Comment Found

Related MCQs

If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
If permissible compressive stress in concrete is 50 kg/cm2, tensile stress in steel is 1400 kg/cm2 and modular ratio is 18, the depth d of the beam, is
Enlarged head of a supporting column of a flat slabs is technically .known as
Top bars are extended to the projecting parts of the combined footing of two columns L distance apart for a distance of
If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose œÜ, the lateral intensity of pressure p2 is
The maximum shear stress (q) in concrete of a reinforced cement concrete beam is
If q is the punching shear resistance per unit area a, is the side of a square footing for a column of side b, carrying a weight W including the weight of the footing, the depth (D) of the footing from punching shear consideration, is
High strength concrete is used in prestressed member
If Md and Mt are the maximum bending moments due to dead load and live load respectively and F is the total effective pressure, for a balanced design of a prestreseed concrete beam of steel, is
The percentage of minimum reinforcement of the gross sectional area in slabs, is