Bishop's method of stability analysis – McqOptions

MCQOPTIONS

1.	Bishop's method of stability analysis
A.	Is more conservative
B.	Neglects the effect of forces acting on the sides of the slices
C.	Assumes the slip surface as an arc of a circle
D.	All of the above
Answer» D. All of the above

Discussion

No Comment Found

Related MCQs

If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is softer than the standard hard rubber, then
In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on
A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is
The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to
The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively
The compression resulting from a long term static load and consequent escape of pore water, is known as
If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow:
Which of the following methods is most accurate for the determination of the water content of soil?
In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be
If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is